Field of ApplicationReady-to-use emulsion based adhesive/glue for bonding Capaver Akkordvliese (fleece types), Capaver FantasticFleece, Capaver Jacquard glass fabrics and K or VB types of Capaver glass fabrics 1100, 1132, 1142, 1152 or 2410 and other (comparable) customary wall coverings. Airless applicable for use with all types of fleeces & fabrics within the Capaver product range.
- Emission-minimised, solvent-free, unplasticized.
- Good initial adhesion.
- Long open-time.
- Ready-to-use for spray application.
- Optimised for use with wallpaper pasting machines.
- 16 kg, 25 kg
- Transparent, White
StorageKeep in a cool, but frost-free place. Keep partially used containers/buckets tightly closed.
DensityApprox. 1.10 g/cm3
Suitability according to Technical Information No. 606 Definition of Application Areas
|Interior 1||Interior 2||Interior 3||Exterior 1||Exterior 2|
|(–) inapplicable / (○) of limited suitability / (+) suitable|
SubstratesThe substrate must be solid, sound/stable, dry, clean, even and free from all substances that may prevent good adhesion. Follow Technical Information No. 650.
In Germany: Follow supplementary information given in VOB, part C, DIN 18363, section 3.
On substrates with contrasting colours: One previously applied priming coat of Capadecor DecoGrund or Caparol Haftgrund.
Method of ApplicationApplicable with paint brush, lambskin roller, airless spray equipment and using wallpaper pasting machine.
Spray angle: 40° - 50° Nozzle size: 0.017" - 0.019" Pressure: 180 - 200 barWall Bonding Technique:
Apply CapaColl VK liberally and evenly onto the substrate in the width of approx. 1 to 3 lengths, using lambskin roller or airless equipment. Apply the fleece/fabric without delay and carefully press on with a wallpaper scraper or roller, avoiding blistering. On slightly absorbent substrates and at low temperature or high relative humidity allow CapaColl VK to flash off sufficiently before fleece/fabric application.
Wallpaper Pasting Machine:
CapaColl VK can directly be used for bonding the glass fabric Capaver® without dilution. CapaColl VK is not reversible, it would therefore be advisable to clean the wallpaper pasting machine before longer breaks.
Surface Coating SystemApplication:
Always follow the corresponding Technical Information before applying wall coverings.
Airless applied CapaColl VK can be used for all fabrics of the Capaver product range, due to the higher applicable quantity. CapaColl GK can be used instead, when a higher initial adhesion is needed.
Finely textured glass fabrics and fleeces: Approx. 150 g/m2
Medium textured: Approx. 100 - 250 g/m2
Determine the exact amount of material required by coating a test area on site.
Application ConditionsLower Temperature Limit for Application and Drying:
+ 5 °C for product, substrate and ambient air.
Drying/Drying TimeAt +20 °C and 65 % relative humidity surface-dry and recoatable after approx. 6 - 12 hours. Thoroughly cured after approx. 3 days. Lower temperatures, higher quantities of applied product or higher relative humidity extend the drying time.
NoteBonding of Capaver AkkordVliese: High material consumption (e.g. when airless applied) may lead to the opening of edgings and must be avoided.
Reworking gypsum filling compounds may lead to swelling, blistering and flaking due to long lasting moisture exposure. Provide for quick drying by sufficient ventilation and temperature. In Germany: Follow Data Sheet No. 2 "Verspachtelung von Gipsplatten" (Trowel Application on Plasterboards) issued by the German Association of Gypsum and Plasterboard Industry.
Please Note (Status as at Date of Publication)Keep out of the reach of children. Ensure good ventilation during use and drying. Do not eat, drink or smoke while using the product. In case of contact with eyes or skin, immediately and thoroughly rinse with water. Do not allow product to enter drains, waterways or soil. Clean utensils immediately after use with soap and water. Do not breathe spray dust.
Further information: See Material Safety Data Sheet (MSDS).
Contains 1,2-benzisothiazol-3(2H)-one, 2-methyl-2H-isothiazol-3-one. May produce an allergic reaction.
In Germany: Advice for allergy sufferers with isothiazolinone allergy: Hotline 0180/5308928
(0.14 €/minute from German landline, MTS max. 0.42 €/minute).
DisposalMaterials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities. Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.
In Germany: Only completely empty containers should be handed in for recycling. Dispose residues of liquid material as watermixable adhesives, dried material residues as hardened adhesives or via domestic waste.
Substances of Content - DeclarationPolyvinyl acetate resin, water, additives, preservative (methyl-/benzisothiazolinone).
Technical AssistanceAs it is impossible to list herein the wide variety of substrates and their specific problems, please request our technical assistance in case of queries. We will describe appropriate working methods, if a substrate not specified above is to be coated.
Customer Service CentreTel.: (+49) 0 61 54 / 71 17 10
Fax: (+49) 0 61 54 / 71 17 11
International Distribution: Please see www.caparol.com