Field of ApplicationCapadecor Metallocryl Interior is a glossy emulsion paint with special metallic pigments for use on interior wall surfaces. Particularly suitable for application on representative wall surfaces, e.g. shopping centres, office buildings, banks, insurance companies, railway stations, discotheques, etc.
- Emission-minimised, solvent-free.
- Meets the requirements of AgBB (Commission for the sanitary evaluation of building material).
- Pronounced (strong) metallic effect.
- Wet scrub resistance class 1 according to DIN EN 13300.
- Fire protection classification according to German standard DIN 4102: A2 "nicht brennbar" (non-combustible).
- Resistant to aqueous disinfectants.
Material Base / VehicleSynthetic resin dispersion/emulsion according to German standard DIN 55945.
Packaging/Package Size2.5 litres, 5 litres and 10 litres
Metallic silver (approx. RAL 9006). Standard colour is comparable with Venato 45 MET. Capadecor Metallocryl Interior can be tinted via the ColorExpress tinting & mixing machine system in numerous colour shades: Metallic effect tints according to RAL, colours of the Caparol 3D System plus, existing Alucryl colours.
Other hues than standard colours of Capadecor Metallocryl Interior must be tinted via the ColorExpress system according to colour collection/scheme "CD-Metallocryl" in order to avoid hue errors (colour deviation). The same also applies to an intermediate coat of Amphibolin, tinted in a colour shade as scheduled.
Colour Schemes for Capadecor Metallocryl Interior:
Typical for the product
Venato 10 MET
Venato 20 MET
Venato 30 MET
Venato 45 MET
Palazzo 155 MET
Palazzo 160 MET
Curcuma 10 MET
Mai 50 MET
Rubin 25 MET
Papaya 65 MET
Amber 70 MET
Marill 50 MET
Palazzo 245 MET
Palazzo 215 MET
Curcuma 45 MET
Melisse 35 MET
Palazzo 125 MET
Marill 10 MET
Citrus 15 MET
Palazzo 5 MET
Colours in the Style of Caparol 3D System plus:
|Amber 10 MET|
Amber 45 MET
Amber 95 MET
Aprico 95 MET
Arctis 100 MET
Arctis 65 MET
Arctis 70 MET
Baccara 10 MET
Baccara 5 MET
Barolo 95 MET
Bordeaux 35 MET
Cameo 155 MET
Citrus 10 MET
Citrus 20 MET
Curry 35 MET
|Curry 95 MET|
Grenadin 95 MET
Jade 70 MET
Lago 45 MET
Lago 50 MET
Laser 10 MET
Lavendel 165 MET
Magma 35 MET
Magma 40 MET
Magma 50 MET
Magma 70 MET
Magma 75 MET
Mai 70 MET
Malachit 40 MET
Melisse 70 MET
|Oase 5 MET|
Oase 70 MET
Pacific 130 MET
Pacific 155 MET
Pacific 40 MET
Papaya 35 MET
Papaya 40 MET
Papaya 45 MET
Papaya 70 MET
Papaya 95 MET
Patina 45 MET
Patina 50 MET
Pinie 15 MET
Pink 25 MET
Pink 30 MET
|Rose 105 MET|
Rose 75 MET
Rose 95 MET
Rubin 5 MET
Saphir 5 MET
Siena 40 MET
Tundra 40 MET
Tundra 80 MET
Tundra 95 MET
Tundra 105 MET
Verona 130 MET
Verona 45 MET
Verona 80 MET
Viola 80 MET
Viola 110 MET
The colours of Capadecor Metallocryl Interior have been formulated in the style of Caparol 3D System plus, but may vary slightly as compared with original colours, due to their metallic character. Therefore a binding conformity cannot be guaranteed.
The metallic effect of colour shades is highly influenced by the perspective of viewers and by the type of illuminant, intensity and angle of entry. Therefore a trial application (coating a test area) on site is advisable.
In addition to the scheme diverse standard metallic effect colours are available, e.g. RAL and existing Alucryl nuances.
Gloss LevelGloss (according to classification DIN EN 13300)
StorageKeep in a cool, but frost-free place.
DensityApprox. 1.0 g/cm³
Suitability according to Technical Information No. 606 Definition of Application Areas
|Interior 1||Interior 2||Interior 3||Exterior 1||Exterior 2|
|(–) inapplicable / (○) of limited suitability / (+) suitable|
Suitable SubstratesThe substrate must be sound/stable, dry, clean, and free from all substances that may prevent good adhesion. Follow VOB, part C, DIN 18363, section 3.
Substrate PreparationThe way of substrate preparation depends on present substrates and their condition. Follow Technical Information Amphibolin for covering surfaces with Metallocryl Interior.
Method of ApplicationThe product should be stirred thoroughly before and during application at regular intervals.
Apply with paint brush or roller. Areas of trimming should be rolled again. For roller application a medium pile roller should be used (pile height 12-16 mm), that prevents accumulation of paint on the margins.
In order to ensure a uniform orientation of effect pigmentation (aluminium mica), apply the product evenly, spread crosswise and then roll in one direction.
On even (smooth/untextured) surfaces a uniform metallic effect coating of Metallocryl Interior cannot be effected without leaving noticeable brush or roller marks.
Highly appealing surfaces are achievable on smooth/even substrates, when Capadecor Metallocryl Interior is evenly roller applied and then directly treated (crosswise) with an oval brush or using the special ArteTwin trowel.
Spray application may lead to a clouding effect (blushing) and uneven gloss level due to spray mist, and is therefore not suggested.
Capadecor Metallocryl Interior can be used on textured surfaces with a grain size of approx. 2 mm or more, without further treatment via brush or trowel.
Smooth/even, fine-textured substrates and surfaces with adverse lighting conditions (grazing light) cannot be coated without leaving noticeable roller marks or a slightly "cloudy" appearance (blushing).
Additional appealing effects are achievable, when Capadecor Metallocryl Interior is used as intermediate coat before applying Capadecor ArteLasur or ArteLasur Color.
Surface Coating System
Capadecor Metallocryl Interior contains special effect pigments. Alkaline and acidal influences may cause discolouration, particularly in combination with high exposure to moisture. Therefore the application of an additional sealing coat of Disbon 481 EP-Uniprimer on alkaline, nonabsorbent substrates is essential (Follow Technical Information No. 481).
Apply one hiding intermediate coat of Amphibolin, tinted in a shade of Caparol 3D System plus, closely matched to the colour of the subsequent coat of Capadecor Metallocryl Interior (Follow Technical Information No. 100 / Amphibolin).
Do not use other products for intermediate coats.
Apply two undiluted (or diluted max. 5 %) finishing coats of Capadecor Metallocryl Interior.
Semi-Transparent/Translucent Coat on Capadecor Fantastic Fleece:
Only the quartz textured pattern "Lino" and "Tira" can be coated. Apply one even coat of Capadecor Metallocryl Interior, diluted to a max. of 10 % with tap (potable) water.
Covering Coat on Capaver ElementEffects:
The intermediate coat of Amphibolin may be omitted, when using the new quality (2013) of Metallocryl Interior on Capaver ElementEffects.
Some critical colour shades (with a high addition of colourants) may require a third coat of Metallocryl Interior.
Apply Metallocryl with short pile roller (liberally) and spread crosswise. Then roll over the surface again, in one direction using the paint roller without product. Trimmings must always be rolled over again. Always apply Metallocryl wet-on-wet.
ConsumptionApprox. 100 ml/m2 per coat on textured substrates. On rough-textured surfaces correspondingly more. The exact consumption is best established by a trial coating (test area) on site.
Application ConditionsLower Temperature Limit for Application and Drying:
+5 °C for product, substrate and ambient air.
Drying/Drying TimeAt +20 °C and 65 % relative humidity surface-dry and recoatable after 4 - 6 hours.
Lower temperatures and higher relative humidity extend the drying time.
Tool CleaningClean tools immediately after use with water.
NoteDo not apply Capadecor Metallocryl Interior on horizontal surfaces exposed to water/moisture.
Do not mix with other materials to preserve the special properties of this product.
To avoid lapping, the product should be applied wet-on-wet and without interruption.
Due to the use of Caparol-Tiefgrund TB in the interiors, a typical solvent odour is released, hence proper ventilation must be provided during application and drying. Use non-aromatic, low-odour AmphiSilan-Putzfestiger in sensitive areas.
- Testing of resistance to disinfectants
- Chamber test according to AgBB schema
- Testing of fire protection classification according to German standard DIN 4102: A2 "nicht brennbar" (non-combustible), when used on solid mineral substrates.
- General appraisal certificate: Fire protection classification according to German standard DIN 4102: B1 "schwer entflammbar" (flame retardant/of low flammability).
Please Note (Status as at Date of Publication)Keep out of reach from children. Ensure good ventilation during use and drying. Do not eat, drink or smoke while using the paint. In case of contact with eyes or skin, immediately and thoroughly rinse with water. Do not allow product to enter drains, waterways or soil. Clean utensils immediately after use with soap and water. Do not inhale spray dust. Contains 1,2-benzisothiazol-3(2H)-one, 2-methyl-2H-isothiazol-3-one. Further information: See Material Safety Data Sheet (MSDS).
DisposalMaterials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities. Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.
In Germany: Only completely emptied containers must be given for recycling. Dispose containers with residues of liquid product via waste collection point accepting old paints and enamels. Dispose dried/hardened product residues as construction site/demolition/municipal or domestic waste.
EU limit value for the VOC contentof this product (category A/b): max. 100 g/l (2010). This product contains < 1 g/l VOC.
Product Code Paints and EnamelsM-DF01
Substances of Content - DeclarationPolyacrylate resin, pearl gloss pigments (coated aluminium), water, esters, additives, preservatives (methyl-/benzisothiazolinone). German hotline for allergy sufferers with allergic reaction to isothiazolinone: 0180 / 530 89 28 (0.14 €/minute using the German landline, mobile network max. 0.42 €/minute)
Technical AssistanceAs it is impossible to list herein the wide variety of substrates and their specific problems, please request our technical assistance in case of queries. We will describe appropriate working methods, if a substrate not specified above is to be coated.
Customer Service CentreTel.: +49 06154- 71 7 1710
Fax: +49 05154- 71 7 1711
International Distribution: Please see www.caparol.com