Field of Application
Suitable as protective finishing coat (transparent sealant) for VarioChips.Material Properties
- Emission-minimised, solvent-free, unplasticized and AgBB tested.
- Lightfast/fadeless at its best.
- Thixotropic.
- Wet scrub resistance Class 2 (Gloss level: Matt) according to DIN EN 13 300.
- Wet scrub resistance Class 1 (Gloss level: Silk-matt) according to DIN EN 13 300.
- Resistant to aqueous disinfectants (Gloss level: Silk-matt).
Material Base / Vehicle
Synthetic resin dispersion/emulsion according to German standard DIN 55945.
Packaging/Package Size
10 l plastic bucket, oval-shaped
Colours
Transparent
Gloss Level
Matt/Silk-matt (Mid sheen)Storage
Keep in a cool, but frost-free place.
Suitability according to Technical Information No. 606 Definition of Application Areas
Interior 1 | Interior 2 | Interior 3 | Exterior 1 | Exterior 2 |
+ | + | ○ | – | – |
(–) inapplicable / (○) of limited suitability / (+) suitable |
Suitable Substrates
The substrate must be sound/stable, dry, clean and free from all substances that may prevent good adhesion. In Germany: Follow VOB, part C, DIN 18363, section 3.Method of Application
Paint roller or brush application.Surface Coating System
Apply VarioFinish liberally and evenly onto the fully dry surface using short pile lambskin paint roller to obtain a sufficient coating thickness. Spread the product onto the surface in one direction.Avoid lapping by wet-on-wet roller application. The matt visual effect supports the natural appearance of VarioChips (highly recommended for rooms with critical lighting conditions).
Advice:
Some designs/types contain mica chips (flakes) and should be coated with VarioFinish Silk-Matt
(see the table in Technical Information No. 810 - VarioChips).
Consumption
Approx. 130 ml/m2 per coat.Determine the exact amount of material required by coating a test area on site.
Application Conditions
Lower Temperature Limit for Application and Drying:+5 °C for product, substrate and ambient air.
Drying/Drying Time
At +20 °C and 65 % relative humidity surface-dry after approx. 4 hours.Lower temperatures and higher humidity extend the drying time.
Tool Cleaning
Immediately after use with water.
Please Note (Status as at Date of Publication)
Keep out of reach from children. Ensure good ventilation during use and drying. Do not eat, drink or smoke while using the product. In case of contact with eyes or skin, immediately and thoroughly rinse with water. Do not allow product to enter drains, waterways or soil. Clean utensils immediately after use with soap and water. Use P2 dust filter for grinding. Do not breathe spray dust. Use A2/P2 combination filter for paint spraying.Further information: See Material Safety Data Sheet (MSDS).
Contains: 1,2-benzisothiazol-3(2H)-one, 2-methyl-2H-isothiazol-3-one. May produce an allergic reaction.
In Germany: Advice for allergy sufferers with isothiazolinone allergy: Hotline 0180/5308928
(0.14 €/minute from German landline, MTS max. 0.42 €/minute).
Disposal
Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities. Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.In Germany: Only completely empty containers should be handed in for recycling. Dispose containers with residues of liquid product via waste collection point accepting old paints and enamels. Dispose dried/hardened product residues as construction site/demolition/municipal or domestic waste.
EU limit value for the VOC content
of this product (category A/a): max. 30 g/l (2010). This product contains max. 1 g/l VOC.
Product Code Paints and Enamels
M-KH01 (Germany)Substances of Content - Declaration
Polyacrylate resin, silicon dioxide (SiO2), water, waxes, additives, preservative (Methyl-/Benzisothiazolinone).Customer Service Centre
Tel.: +49 6154 71-71710Fax: +49 6154 71-71711
e-mail: kundenservicecenter@caparol.de
International Distribution: Please see www.caparol.com