Capadecor Calcino Imprägnierpaste

Paste-like mineral impregnation to protect Calcino-Decor
from polluted liquids.
  • LV Texte

    Field of Application

    Mineral impregnation paste, suitable to protect Calcino-Decor from polluted liquids. Surface impregnation with this product is highly recommended, since proper carbonisation of lime needs a longer time period (hardening of lime products by absorbing CO2 from the air) and colour pigments of tinted Calcino-Decor are not fully consolidated during the carbonisation process.
    We recommend to apply a thin coat of impregnating paste with a double blade scraper and to draw off powerfully. (Front edge should preliminary be wet sanded with 400-grit sandpaper!)

    Material Properties

    • Fatless, colourless and odourless.
    • Purely mineral.
    • Highly diffusion- and sorption-capable.
    • Solvent-free.

    Packaging/Package Size

    0.750 kg plastic can




    Keep in a cool, but frost-free place. Do not store below 5 °C.
    Keep partially used cans always tightly closed, thus avoiding agglutination and initial drying.

    Suitable Substrates

    The substrate must be sound/stable, dry, clean, and free from all substances that may prevent good adhesion. In Germany: Follow VOB, part C, DIN 18363, section 3.

    Method of Application

    Allow the surface to harden for 3 to 6 days for carbonisation of lime (do not apply an impregnation during this timeframe). Discolouration may occur with premature treatment. Apply a fine coat of impregnation paste Calcino-Imprägnierpaste evenly with a non-scouring Venetian trowel or (recommended) with a soft, non-fuzzing cloth/tissue. Do not apply more than 30 to 40 g/m2. Allow to flash off for a short time, then remove excess product with a soft cloth. Allow to dry, then wipe again.
    The application of excess impregnating paste may lead to a slight whitish fogging effect (surplus of pumice dust) which cannot be objected. Wipe off again to reduce this effect.


    30 - 40 g/m2

    Application Conditions

    Lower Temperature Limit for Application and Drying: + 10 °C for product, ambient air and substrate.


    Apply a fine coat of impregnation paste evenly with a non-scouring Venetian trowel or (recommended) with a soft, non-fuzzing cloth/tissue.

    Tool Cleaning

    Clean tools immediately after use with tap water.
    Only clean tools should be used for application.

    Cleaning and Maintenance

    Calcino-Imprägnierpaste (impregnating paste) does not protect against direct spray/splashing water loads (limescale formation) or soiling caused by substances with contents of fat/grease, acids, tar, caffeine, theine or discolouring substances that leaves marks.
    Slight surface soiling is removable with warm water, adding a neutral household detergent, if necessary. Note: Do not use descalers.

    Special Risks (Hazard Note) / Safety Advice (Status as at Date of Publication)

    Keep out of reach of children.Do not eat, drink or smoke when using this product. Avoid release to the environment. IF ON SKIN: Wash with plenty of soap and water.


    Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities. Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.
    In Germany: Only completely emptied cans/containers should be given for recycling. Dispose containers with residues of liquid material as remnants of water-based paints and dried material as hardened paints waste or via domestic waste.

    Substances of Content - Declaration

    rock flour, water, higher alcohols

    Further Details

    See Material Safety Data Sheet (MSDS).

    Customer Service Centre

    Tel.: +49 6154 71-71710
    Fax: +49 6154 71-71711

    International Distribution: Please see

    Product recommendation:

    Capadecor Calcino Romantico

    Capadecor Calcino Imprägnierpaste

    Capadecor StuccoDecor Wachsdispersion

    PutzGrund 610