Capacryl PU-Matt

High-grade polyurethane-acrylic enamel for interior use

  • LV Texte

    Field of Application

    High-grade intermediate and finishing coats on primed wood component parts, primed metals and unplastizised/rigid PVC, for interior use. Do not use white tints on heating systems to avoid yellowing (apply Capacryl Heizkörperlack).

    Material Properties

    • Low odour
    • Elegant and easy application
    • Non-blocking
    • Diffusion-capable
    • Resistant to normal household cleaners
    • Suitable for children toys according to DIN EN 71-3

    Material Base / Vehicle

    Polyurethane-acrylic dispersion/emulsion

    Packaging/Package Size

    • White:
      375ml, 750 ml, 2,5 litres and 10 litres
    • ColorExpress:
      350 ml, 700 ml, 2,4 litres and 9,6 litres



    Can be tinted via ColorExpress stations (Capamix) in many special tints of Caparol 3D-System plus collection and in many colours of other collections.

    On intensively or dark tinted Capacryl PU-Matt coatings in the interiors a slight temporary abrasion of pigments may appear.

    When applying colours with low opacity, like Red, Orange or Yellow, it is advisable to apply one priming coat using the matching colour shade of our Priming System.
    Priming System colours are available via the ColorExpress tinting technique for Capacryl PU-Matt.

    Colour Resistance according to BFS Data Sheet No. 26:
    Binder: Class A
    Pigmentation: Group 1 to 3 depending on the colour

    Gloss Level



    Keep in a cool, but frost-free place.
    Shelf life: 24 months in the original, tightly closed container.


    Approx. 1.3 g/cm³

    Suitability according to Technical Information No. 606 Definition of Application Areas

    Interior 1Interior 2Interior 3Exterior 1Exterior 2
    (–) inapplicable / (○) of limited suitability / (+) suitable

    Suitable Substrates

    Primed wood component parts, primed metals and unplastizised/rigid PVC.
    The substrate must be clean, sound/stable, dry and free from substances that may prevent good adhesion. 

    Method of Application

    Capacryl PU-Matt can be applied by brush, roller or spraying equipment. Stir well before use. 

    Manual application on large surfaces: Apply with a textured, short pile polyamide (nylon) roller and treat immediately with a fine-porous foam roller or Orelmix brush. 

    For a fast application and an even surface treatment the tool sizes should be adjusted to the surface area.

    Guidelines for Spray Application:

    Ø NozzleSpray Gun PressureAir PressureDilution
    Airless0.008 – 0.011 inch200 bar
    Airmix/Aircoat0.011 – 0.013 inch120 bar2-3 bar
    Low Pressure1.8 – 2.2 mmapprox. 0.5 barmax. 15 %
    High Pressure2.0 – 2.5 mm2 – 3 barmax. 15 %

    Surface Coating System




    Priming Coat




    sanding / cleaning

    Capacryl Holz-IsoGrund 1)



    Iron, steelinterior

    derusting / cleaning

    Capalac AllGrund


    BFS Data Sheet 
    No. 5

    Capacryl Haftprimer

    Aluminium / copperinterior

    BFS Data Sheet 
    No. 6

    Capacryl Haftprimer

    Rigid PVCinterior

    BFS Data Sheet 
    No. 22

    Capacryl Haftprimer

    Sound existing paint coatingsinterior

    sanding / treat with alkali

     Capacryl Haftprimer

    Apply two intermediate coats on dimensionally stable wood component parts according to BFS Data Sheet No. 18.
    1. Always apply Capacryl Holz-IsoGrund on wood containing water-soluble, discolouring substances (2 x on knots).
    2. The intermediate coat should match the finishing coat in shade. Via ColorExpress an optimised shade is automatically mixed for red, yellow or orange tints with poor covering power to achieve a higher opacity of the finishing coat. This may cause a slightly different shade.
    3. Tints with poor opacity (e.g. yellow/red/orange pigmented) may require an additional coat.
    Note: Adhesion must be tested in advance for powder coatings, coil coatings and other critical substrates by a trial application.


    Approx. 100 – 120 ml/m2 per coat.
    Consumption is a guide value and may vary, depending on substrate requirements. The exact consumption is best established by a trial coating (test area) on site.

    Application Conditions

    Lower Temperature Limit for Application and Drying:
    Min. 8 °C for product, substrate and ambient air.
    Relative humidity must not exceed 70 %.

    Drying/Drying Time

    At 20 °C and 65% relative humiditydust dry
    recoatable (by brush)completely dry
    after hours1–210–1248
    Lower temperatures and higher humidity extend the drying time.

    Tool Cleaning

    Immediately after use with water.

    Special Risks (Hazard Note) / Safety Advice (Status as at Date of Publication)

    May cause an allergic skin reaction. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Do not get in eyes, on skin, or on clothing. Wear protective gloves/ eye protection. IF ON SKIN: Wash with plenty of soap and water.

    Contains: 1,2-benzisothiazol-3(2H)-one, 2-methyl-2H-isothiazol-3-one, mixture of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1). mixture of: 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-2H-isothiazol-3-one (3:1) < 15 ppm


    Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities. Particular attention should be made to removing wastage from site in compliance with standard construction site procedures. 
    In Germany: Only completely emptied containers should be given for recycling. Dispose containers with residues of liquid product via waste collection point accepting old paints and enamels. Dispose dried/hardened product residues as construction site/demolition/municipal or domestic waste.

    EU limit value for the VOC content

    of this product (category A/d): max. 130 g/l (2010). This product contains max. 130 g/l VOC.



    Substances of Content - Declaration

    Polyacrylic resin, polyurethane / polyacrylic resin, titanium dioxide, silicates, water, glycols, glycol ethers, ester alcohol, additives, preservatives.

    Customer Service Centre

    Tel.: +49 6154 71-71710
    Fax: +49 6154 71-71711

    International Distribution: Please see

    Product recommendation:

    Capacryl Holzschutz-Grund

    Capacryl Holz-IsoGrund

    Capalac AllGrund

    Capacryl Haftprimer

    Capacryl PU-Vorlack