Capacryl Fenster-Lack

Water-thinnable, PU acrylic enamel for coating windows.
Suitable for exterior and interior use.
caparol_pim_import/caparol_de/products/image/185590/055994_CAPACRYL_Fenster-Lack.png

Field of Application

For glossy, ecologically compatible paintings of windows and doors. For interior and exterior use.

Material Properties

  • Water-thinnable/dilutable.
  • Ecologically compatible.
  • Low odour.
  • Non-blocking.
  • Excellent opacity (hiding/covering power) on surfaces and edges.
  • Resilient.
  • Resistant to normal window cleaners.
  • Diffusion-capable.

Material Base / Vehicle

Polyurethane-acrylic dispersion/emulsion.

Packaging/Package Size

750 ml, 2.5 litres

Colours

White

Colour Resistance according to BFS Data Sheet No. 26:
Binder: Class A
Pigmentation: Group 1

Gloss Level

Gloss

Storage

Keep in a cool, but frost-free place.
Shelf life of the original, tightly closed packaging: 12 months.

Density

Approx. 1.2 g/cm3

Suitable Substrates

Primed windows and doors as well as primed unplasticized (rigid) PVC and sound existing paints.
The substrate must be clean, sound/stable, dry, and free from all substances that may prevent good adhesion. Maximum permissible wood moisture in dimensionally stable wood: 13 %.

Substrate Preparation

Wooden Parts:
Sand the surface in fibre direction, clean thoroughly, then remove seeping wood contents, e.g. resin/rosin and resin/pitch pockets, cut sharp edges (see BFS Data Sheet No. 18).

Unplasticized (Rigid) PVC:
Wash with light ammonia solution using sanding pad according to BFS Data Sheet No. 5 and No. 22.

Sound Existing Paint Coatings:
Sand the surface of existing paint coatings slightly and/or treat with alkali. Remove unsound coatings.

Method of Application

Guidelines for Spray Application:

Ø NozzleSpray pressureAir pressureDilution
Airless0.011–0.015 inch200 barmax. 5 %
Airmix/Aircode0.011–0.015 inch120 bar2.5 barready to use
Finecoat1.8–2.2 mmapprox. 0.5 barmax. 5 %
High pressure2.0–2.5 mm5.0 barmax. 5 %

Surface Coating System

SubstrateUseSubstrate PeparationImpregnationPriming CoatIntermediate CoatFinishing Coat
Wood, derived productsinteriorsanding/
cleaning
Capacryl Holzschutz-Grund
or Capacryl Holz-IsoGrund1)
if required Capacryl Fenster-LackCapacryl
Fenster-Lack
WoodexteriorBFS Data Sheet No. 18 cleaningCapacryl
Holzschutz-Grund
Capacryl Holzschutz-Grund
or Capacryl Holz-IsoGrund1)
Capacryl Fenster-Lack
Rigid PVCinterior/exteriorBFS Data Sheet No. 22Capacryl Haftprimer
Sound existing coats of paintinterior/exteriorsanding / treat with alkali2)Capacryl Haftprimer2)
Apply two intermediate coats on dimensionally stable wooden parts as per BFS Data Sheet No. 18.
1.Always apply Capacryl Holz-IsoGrund on wood with water-soluble, discolouring wood components (2 x for knots).
2.Defective existing paint coatings: Prepare and prime according to substrate requirements.

Note: Adhesion must be tested in advance for powder coatings, coil coatings and other critical/problematic substrates by trial coatings (test areas) on site.

Processing:
Capacryl Fenster-Lack can be applied by brush, roller or with spraying equipment. Dilute to a max. of 5 % with tap (potable) water, if necessary, and stir thoroughly before use.

Consumption

Approx. 100 – 130 ml/m2 per coat.
Consumption is a reference value and may vary depending on substrate condition. The exact consumption is best established by a trial coating on site.

Application Conditions

Lower Temperature Limit for Application and Drying:
+8 °C for product, substrate and ambient air.

Drying/Drying Time

At 20 °C and 65 % relative humidity.Dust dryRecoatableCured
Hours1–210–1248
Lower temperatures and higher humidity extend the drying times.

Tool Cleaning

Immediately after use with water.

Please Note (Status as at Date of Publication)

Keep out of reach from children. Use P2 dust filter for grinding. Ensure good ventilation during use and drying. Do not eat, drink or smoke while using the product. In case of contact with eyes or skin, immediately and thoroughly rinse with water. Do not allow product to enter drains, waterways or soil. Clean utensils immediately after use with soap and water. Do not inhale spray dust. Use dust collector A2/P2. Further information: See Material Safety Data Sheet (MSDS).

This product contains 1,2-Benzisothiazol-3(2H)-on, 2-Methyl-2H-isothiazol-3-on. Advice for allergy sufferers: German hotline 0180/530 89 28 (0.14 €/minute from German landline, MTS max. 0.42 €/minute).

Disposal

Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities. Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.

In Germany: Dispose containers with residues of liquid product via waste collection point accepting old paints and enamels. Dispose dried/hardened product residues as construction site/demolition/municipal or domestic waste.

EU limit value for the VOC content

of this product (category A/d): max. 130 g/l (2010). This product contains max. 120 g/l VOC.

Product Code Paints and Enamels

M-LW01

Substances of Content - Declaration

Ingredients according to German Guideline VdL-RL01:
Polyacrylate resin, titanium dioxide, silicates, water, glycols, glycol ether, additives, preservative (methyl-/benzisothiazolinone).

Customer Service Centre

Tel.: (+49) 0 61 54 / 71 17 10
Fax: (+49) 0 61 54 / 71 17 11
e-mail: kundenservicecenter@caparol.de

International Distribution: Please see www.caparol.de/en

Product recommendation:


Capacryl Holzschutz-Grund

Capacryl Holz-IsoGrund

Capacryl Haftprimer

Capalac BaseTop Venti