Capadur Repair P

2-component primer for Capadur Repair AS

LV Texte

Field of Application

Primer for wood repairing compound Capadur Repair AS.

Material Properties

  • Solvent-free.
  • Impregnating.
  • Wood strenghthening.

Material Base / Vehicle

Epoxy resin

Packaging/Package Size

Set of 2 plastic bottles, 100 ml each (Component A + B).




Keep in a cool place. Shelf life of original (tightly closed, unopened) bottles: 24 months.


Approx. 1.1 g/cm³   

Suitability according to Technical Information No. 606 Definition of Application Areas

Interior 1Interior 2Interior 3Exterior 1Exterior 2
(–) inapplicable / (○) of limited suitability / (+) suitable

Suitable Substrates

Wood component parts (dimensionally stable, limited stable or of unstable shape).

Defects on wooden parts (rottenness/decay) indicate wetness due to dammed-up water. They are normally caused by structural defects/deficiencies which must be repaired before using Capadur Repair AS.
Histolith® Sanopas-Holzrisspaste can be used instead, when timber framing has to be
repaired considering aspects of care and preservation of ancient monuments.

Maximum permissible wood moisture content (WMC): 15 %

Substrate Preparation

Wood component parts must be checked for being free of structural defects. Deficiencies must be remediated in a proper, technically correct manner.

Shape/mill all cracks and open timber joints for min. 5 mm wide and 5 mm deep. Completely remove all decomposed or insufficiently stable wood by shaping/milling or sawing. (Suitable tools: Fein Multimaster or spherical-head shaper, delivered by miscellaneous manufacturers). Thoroughly remove all wood dust.

Mixing Ratio

Mix component A and B in ratio 1 : 1 (parts by volume).

Method of Application

Mixing: Pour same parts by volume of component A (red) and component B (beige) in required quantity into a suitable vessel, then stir slowly and thoroughly to obtain a homogeneous mixture.
Application:  Brush apply Capadur Repair P thoroughly and evenly in order to achieve a proper wetting effect of the full area to be repaired. Then allow the primer to flash off for min. 20 minutes (but no longer than max. 2 hours) and apply Capadur Repair AS to the primed area. Note: The primer must not be wet. Remove all excess product with a cloth.
Large repair patches are to be filled with fitted bits of wood (insert to the repair compound). Take care to provide for a min. 5 mm wide joint of repair compound on all sides between filling bits of wood and the wood component part. Prime all contact surfaces with Capadur Repair P and, after a flash off time of 20 minutes (2 hrs. at the latest), apply Capadur Repair AS onto the full surface. Lay in all bits of wood avoiding blistering and remove all excess product with a scraper.


Approx. 250 ml/m2


Pot life: Approx. 20 minutes at 20 °C air temperature. Pot life is shorter at higher temperatures. Avoid application under a glaring sun.

Tool Cleaning

With special cleaning wipes or with Disboxid 419 Verdünner (thinner).

Special Risks (Hazard Note) / Safety Advice (Status as at Date of Publication)

Mass (Component A):
Restricted to professional users.
Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Toxic to aquatic life with long lasting effects. Do not get in eyes, on skin, or on clothing. Wash hands thoroughly after handling. Avoid release to the environment. Wear protective gloves/ eye protection. If skin irritation occurs: Get medical advice/ attention. If eye irritation persists: Get medical advice/ attention. Contains: bisphenol-F epoxy resin MW <700, reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight ≤ 700), 1,6-bis(2,3-epoxypropoxy)hexane.
Hardener (Component B):
Restricted to professional users.
Harmful if swallowed. Causes severe skin burns and eye damage. May cause an allergic skin reaction. Harmful if inhaled. Do not breathe vapours/ spray. Do not get in eyes, on skin, or on clothing. Avoid release to the environment. Use personal protective equipment as required. IF ON SKIN: Wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.  Dispose of contents/ container to an approved waste disposal plant.
Contains Benzyl alcohol, m-Phenylenebis(methylamine), 2-Piperazin-1-ylethyl-amine, Isophorone diamine. May produce an allergic reaction.


Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authority. Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.
In Germany: Only completely emptied bottles should be handed in for recycling. Product residues: Allow curing of base material with hardener (component A + B) and dispose of as paints waste.


RE1 (Germany)

Further Details

See Material Safety Data Sheet (MSDS).

Customer Service Centre

Tel.: +49 6154 71-71710
Fax: +49 6154 71-71711

International Distribution: Please see

Product recommendation:

Capadur Repair AS

Capadur Repair FK

Capadur Repair H

Capadur RenoTech

Capadur UniversalLasur