caparol_pim_import/caparol_de/products/image/297618/077224_Capadur_F7-LangzeitLasur_2,5L.png

Capadur F7-LangzeitLasur

The glaze for windows and doors.
    • LV Texte

    Field of Application

    Solvent-based thick-film glaze suitable for the coloured design and protection of dimensionally stable wooden components (such as windows and doors) and limited dimensionally stable wooden components (such as tongue-and-groove boards, shutters, gates). Can be used outdoors and on small areas indoors.

    Due to the odour typical of alkyd resin glazes, we recommend Capadur DecorLasur KF for large-area coatings indoors.

    Before coating panel-shaped wood materials (e.g. solid wood panels), please observe the instructions in BFS-Merkblatt no. 18, section 2.2.3 ff.

    Material Properties

    • Ideal for renovating windows & doors
    • Low maintenance thanks to long maintenance intervals
    • High colour stability & UV protection thanks to transparent iron oxide pigments
    • Biocide-free
    • Drip-inhibited

    Material Base / Vehicle

    Alkyd resin

    Packaging/Package Size

    • Standard Colours:
      2,5 l
    • ColorExpress:
      700 ml, 2,5 l, 5 l

    Colours

    Transparent, Pine, Oak, Nut Tree, Walnut, Rosewood, Teak, Mahogany, Ebony.

    Other colours can be tinted using ColorExpress. The base material is the colour ‘Transparent’

    Note:
    Capadur F7-LangzeitLasur ‘colourless’ may only be used outdoors as a primer under a coloured glaze or as a top coat on a dark-coloured glaze, as otherwise sufficient UV protection is not guaranteed. Do not use colourless glaze in outdoor areas exposed to the weather.

    Gloss Level

    Silk gloss.
    The gloss level can vary depending on the wood surface.

    Storage

    Please store in a cool place and keep the container tightly closed.

    Density

    Approx. 0.90 g/cm3

    Suitability according to Technical Information No. 606 Definition of Application Areas

    Interior 1Interior 2Interior 3Exterior 1Exterior 2
    ○○○++
    (–) inapplicable / (○) of limited suitability / (+) suitable

    Suitable Substrates

    Dimensionally stable and limited dimensionally stable timber components. The substrate must be clean, stable and free from separating substances. The wood moisture content must not exceed 13 % for dimensionally stable wooden components and 15 % for limited dimensionally stable wooden components. The principles of structural timber protection must be observed. These are a prerequisite for durable wood protection with coating materials.

    Substrate Preparation

    The wooden surfaces must be cleaned of dust, dirt, resin pockets, grease, oil, etc. before coating. Thoroughly brush off any sanding dust or loose residue from old coats. Silicone residues lead to levelling problems.


    New Wooden Parts:
    Sand smooth wood surfaces in the direction of the fibres, clean thoroughly, remove any escaping wood substances such as resins and resin pockets. Use Capalac Holz-Imprägniergrund beforehand in exterior areas.

    Untreated exterior wood should be coated immediately before it is exposed to the weather (UV radiation, precipitation, wind). Otherwise, reduced adhesion of the coating can be expected due to the formation of a separating layer. The degree of problematic nature of this separating layer cannot be determined with standard construction site tests.

    Untreated Existing Wood:
    Sand greyed, weathered wood surfaces down to the sound, stable wood and clean thoroughly. Use Capalac Holz-Imprägniergrund for exterior areas beforehand.

    Coated wood / window & door renovation:
    Completely remove old coatings that are not stable except for the wood. In exterior areas, use Capalac Holz-Imprägniergrund beforehand.
    Sand and clean stable old coatings and check for compatibility with Capadur F7-LangzeitLasur.

    Method of Application

    Paint at least twice undiluted. For maintenance coats with F7-LangzeitLasur, paint at least once or twice.
    Only spray or spray in closed systems with extraction equipment.
    The product is thixotropic. The thixotropic effect is reduced by mechanical stress (stirring). After a few hours at rest, the thixotropy is restored.

    Surface Coating System

    SubstrateApplicationPrimerIntermediate & top coat
    Dimensionally stable wooden componentsexteriorCapalac Holz-Imprägniergrund2x Capadur F7-LangzeitLasur
    Limited dimensional stability of wooden componentsexteriorCapalac Holz-Imprägniergrund2x Capadur F7-LangzeitLasur
     interiorCapadur F7-LangzeitLasurCapadur F7-LangzeitLasur

    The sole use of colourless is not suitable.

    Consumption

    Brush application on smooth wooden surfaces:
    approx. 80 - 100 ml/m2

    Brush application on rough sawn wood surfaces:
    approx. 100 - 120 ml/m2

    The consumption values are approximate values that may vary depending on the substrate and substrate condition. Exact consumption values can only be determined by prior test coatings.

    Application Conditions

    • Material, circulating air and substrate temperature: at least 5 °C (favourable range: 10 to 25 °C)
    • Relative humidity: ≤ 80 %

    Drying/Drying Time

    At 23 °C and 55 % relative humidityrecoatablerainproof / dry
    after hours10 - 1224
    The absorbency of the wood substrate influences drying and gloss. Drying delays may occur on woods with wood constituents (e.g. oak).

    Tool Cleaning

    Clean tools after use with synthetic resin thinner or universal thinner.

    Special Risks (Hazard Note) / Safety Advice (Status as at Date of Publication)

    May cause an allergic skin reaction. Harmful to aquatic life with long lasting effects. Avoid breathing mist or vapors. Avoid release to the environment. Wear protective gloves. If skin irritation or rash occurs: Get medical advice/ attention. Take off contaminated clothing and wash it before reuse. Dispose of contents/ container to an approved waste disposal plant. Repeated exposure may cause skin dryness or cracking. Contains: Reaction mass of bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate and methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate, maleic anhydride. For commercial/industrial applications. Hotline for allergy enquiries: 0800/1895000 (free of charge from the German landline network).

    Disposal

    Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local, regional, national and international authorities. Must not reach sewage system or environment.

    EU limit value for the VOC content

    of this product (category A/e): max. 400 g/l (2010). This product contains max. 360 g/l VOC.

    Giscode

    BSL40

    Substances of Content - Declaration

    Alkyd resin, silicates, aliphatics, ester alcohol, glycols, water, glycol ether, additives.

    Further Details

    See Material Safety Data Sheet.

    Technical Assistance

    All substrates encountered in practice and their technical processing cannot be dealt with in this publication. If substrates are to be treated that are not listed in this technical information, it is necessary to consult us or our sales representatives. We will provide you with detailed and object-related advice.

    Customer Service Centre

    Tel.: +49 6154 71-71710
    Fax: +49 6154 71-71711
    e-mail: kundenservicecenter@caparol.de

    International Distribution: Please see www.caparol.com

    Product recommendation:

    Details

    Capalac Holz-Imprägniergrund

    Details

    Capadur LasurGel

    Details

    Capadur UniversalLasur

    Details

    Capadur Wetterschutzfarbe NQG