Field of Application
Decorative surface coating for individual design in the Capatect façade systems and as an interior application.Material Properties
- Hand-formed from high-quality and approx. 90% mineral raw materials
- Low cladding weight of only 5 kg/m2 and therefore low CO2 footprint according to EPD
- Slender material structure of only approx. 8 mm incl. base coat
- Weatherproof and UV-resistant, durable
- Hard-wearing and resistant to mechanical stress, scratch-resistant and resistant to cleaning
- Water vapour diffusible
Types that can be delivered
Formate | ||||
Format | Dimensions [mm] | Product-No. | Packaging | Consumption |
Thin format (DF/Format II) | 240 x 52 | 071 | 3,0 m2/box =192 pieces | 64 pieces/m2 |
Normal format (NF/Format III) | 240 x 71 | 085 | 3,0 m2/box = 144 pieces | 48 pieces/m2 |
Multi format (MF) | 300 x 52, 300 x 71, 300 x 135 | 076 | 3,0 m2/box = 45 / 45 / 19 pieces | individual, depending on the division of the format |
Special format (SF) | 300 x 135 | 074 | 3,0 m2/box = 66 pieces | 22 pieces/m2 |
Exclusive long format (LF) | 400 x 40 | 078 | 3,0 m2/box = 141 pieces | 47 pieces/m2 |
Large format (GF) | 600 x 300 | 072 | 3,0 m2/box = 16 pieces | 6 pieces/m2 |
Extra long format (XLF) | 740 x 52 | 070 | 3,0 m2/box = 63 pieces | 21 pieces/m2 |
My Meldorfer | depending on the chosen geometric shape | 099 | individual, depending on the division of the format | |
Material thickness: 4-6 mm |
Angle brick with header and a whole stretcher (edges 1/1) | ||||
Format | Dimensions [mm] | Product-No. | Packaging | Consumption |
Thin format (DF/Format II) | 240 x 115 x 52 | 075 | 3,0 m/box = 48 pieces | 16 pieces/m |
Normal format (NF/Format III) | 240 x 115 x 71 | 087 | 3,0 m/box = 36 pieces | 12 pieces/m |
Multi format (MF) | 240 x 115 x 52 / 71 / 135 | 077 | 3,0 m/box = 12 / 12 / 9 pieces | individual, depending on the division of the format |
Special format (SF) | 240 x 115 x 135 | 097 | 3,0 m/box = 21 pieces | 7 pieces/m |
Exclusive long format (LF) | 240 x 105 x 40 | 079 | 3,0 m/box = 36 pieces | 20 pieces/m |
Material thickness: 4-6 mm |
Angle brick with header and a whole 3/4 stretcher (edges 3/4) | ||||
Format | Dimensions [mm] | Produkt-No. | Packaging | Consumption |
Thin format (DF/Format II) | 175 x 115 x 52 | 073 | 3,0 m/box = 48 pieces | 16 pieces/m |
Normal format (NF/Format III) | 175 x 115 x 71 | 086 | 3,0 m/box = 36 pieces | 12 pieces/m |
Material thickness: 4-6 mm |
Special formats, colours and surfaces on request.
Slight dimensional tolerances to achieve the natural look must be taken into account.
Colours
Product line | Colour | Shade | Formats |
URBAN CLASSIC | Altweiß | - | DF, NF |
Juist✱ | beige, beige-grey, beige-yellow | DF, NF | |
Sylt✱ | yellow, orange, yellow-orange | DF, NF | |
Antik✱ | light, dark | DF, NF | |
Mecklenburg✱ | light red, medium red, dark red and brand | DF, NF | |
Hamburg✱ | light, dark | DF, NF | |
Dithmarschen | - | DF, NF | |
Rotbunt✱ | light, medium, dark | DF, NF | |
Lüneburg✱ | light, medium, dark | DF, NF | |
Friesland | - | DF, NF | |
Oldenburg✱ | light red, medium red, dark red | DF, NF | |
Brandenburg✱ | brand, plain | DF, NF | |
Westerwald✱ | grey-medium, grey-reddish, grey-greenish | NF | |
Stockholm | - | LF | |
Oslo✱ | light, dark | LF | |
Sandstein✱ | grey✱✱, yellow✱✱, red✱✱ (one pack each) | MF | |
Kopenhagen | - | LF | |
NEW DESIGN | Kolding✱ | grey, yellow | DF, NF, LF, XLF |
Jever | - | DF, NF, LF, XLF | |
Stralsund | - | DF, NF, XLF | |
Helsinki✱ | beige | DF, NF, LF, XLF | |
Holstein✱ | red, brown, sand | DF, NF, LF, XLF | |
Kiel✱ | red, brown, brand | DF, NF, LF, XLF | |
Malmö✱ | light brown, beige | DF, NF, LF, XLF | |
Steingrau✱ | beige, grey, dark grey | SF | |
Bork | - | SF, GF, XLF | |
Betongrau | - | SF, GF | |
MY MELDORFER | Projekt Puzzle✱ | light grey, dark grey | various formats |
Projekt Seamless Patterns✱ | light beige, sand, dark grey | ||
Projekt Schlüssel✱ | light green-grey, green-grey, green | ||
Projekt Würfel✱ | light grey, grey, medium grey | ||
Projekt Vierecke✱ | light red, red | ||
Projekt Dreiecke✱ | light blue, blue, dark blue | ||
Projekt Tetres✱ | beige, yellow, grey | ||
Projekt Quadratwelle✱ | - | ||
✱ These shades are packaged in different shades to be mixed in application to create a natural colour play. | |||
✱✱ To achieve a natural colour play, these shades must be ordered individually and also processed mixed. |
Storage
Dry, protected from moisture and sunlight.
Heat conductivity
λR = 0.70 W/(m · K) as per DIN 4108Fire behaviour
A2-s1, d0 as per DIN EN 13501-1Water permeability (w-value)
≤ 0.1 kg/(m2h1/2) according to DIN EN 1062-3
Category W3 (low) according to DIN EN 15824
Water vapour permeability (sd-value)
< 1,4 mClass V2 (medium) according to DIN EN 15824
Supplementary Product
- Meldorfer Ansatzmörtel 080 (adhesive mortar)
- Meldorfer Fugenmörtel 081 (joint filler)
- Meldorfer Zahnkelle 098 (trowel)
- Meldorfer Winkelschere 098 (angle scissors)
By using natural aggregates, slight color differences might be possible. Pay attention to process the same production numbers or premix the required material quantities.
Suitable Substrates
External thermal insulation composite systems:
- Finished, hardened base coat according to selected approval.
Prime cementitious substrates (also mineral base coats) with Putzgrund 610 to largely exclude efflorescence.
Mineral substrates made of:
- Mortar group PII, PIII according to DIN V 18550, etc.
- concrete
- load-bearing mineral old render and coatings
- gypsum plasterboard or base coats of mortar group PIV + V indoors
Substrate Preparation
The substrate must be even, clean, dry, solid, load-bearing and free of separating or adhesion-reducing residues or substances. Impurities and substances with a separating effect (e.g. formwork oil) as well as protruding mortar burrs must be removed.
Application Conditions
During The application and in the drying phase, the ambient and substrate temperatures must not be below +5 °C and above +30 °C.
Do not apply in direct sunlight, strong wind, fog or high humidity. In this context, we refer to the leaflet "Verputzen, Wärmedämmen, Spachteln, Beschichten bei hohen und tiefen Temperaturen" (Rendering, Thermal Insulation, Filling, Coating at High and Low Temperatures) from the Bundesverband Ausbau und Fassade (Federal Association for Finishing and Facades).
Tool Cleaning
Immediately after use with water.
Laying and Jointing
Preparatory work
Some shades of Original Meldorfer are composed of graduated colour nuances. To achieve a play of colours on the surface, the different shades must be well pre-mixed with each other. In order to avoid the concentration of individual colour shades and possible dimensional tolerances, the Original Meldorfer should therefore be mixed when the layers are removed from the box and laid.
Divide the areas to be laid evenly with continuous height markings (cord markings) to determine work steps:
Format | Height | Number layers | Number joints | Height Joints | Height of the work section |
Normal Format (NF) | 71 mm | 4 | 4 | 12 mm | 332 mm |
Thin Format (DF) | 52 mm | 5 | 5 | 10,5 mm | 312 mm |
Multiformat (MF) | 3 Formate | 3 | 3 | 10 mm | 290 mm |
Special Format (SF) | 135 mm | 2 | 2 | 10 mm | 290 mm |
Long Format (LF) | 40 mm | 6 | 6 | 10 mm | 300 mm |
Large Format(GF) | 300 mm | 1 | 1 | 10 mm | 310 mm |
Extra Long Format (XLF) | 52 mm | 5 | 5 | 10,5 mm | 312 mm |
When dividing the façade for an even installation of Original Meldorfer, observe the fixed lines (e.g. windows, doors, roll layers, etc.) and use them as a starting point for dividing the façade. Slight shifts in dimensions can be taken into account when dividing the height.
Applying
Original Meldorfer is best applied from top to bottom, starting with the corner facing bricks.
Capatect Meldorfer Ansatzmörtel 080 must always be applied in strips within the height markings and combed through in the direction of laying with the Meldorfer notched trowel 098 (toothing 4 x 6 mm). When applying the large format (GF), use a toothed trowel 6 x 6 mm.
The individual Original Meldorfer should be pressed firmly into the mortar with a pushing motion so that no hollow layers are created. Only as much mortar should be applied as can be laid immediately before the skin forms. Care must be taken to ensure an exact division between stretcher and binder arrangement.
With the "Sandstein" (sandstone) colour, a harmonious surface design can be achieved with a regular or random combination of the different formats and corresponding cuts. Preferably, the three sandstone colours grey, yellow and red should be mixed with each other.
Joints
Afterwards, the mortar should be spread evenly in the joint area with a wet 10 mm flat brush and worked onto the flanks of the Original Meldorfer. The transitions of the adhesive mortar to the Original Meldorfer must be tightly sealed to prevent water from migrating behind.
If desired, the Original Meldorfer can also be given an additional full jointing with Capatect Meldorfer Fugenmörtel 081. To improve the adhesion of the materials to each other by means of mechanical bonding, it is recommended to leave the serration of the (Ansatzmörtel 080) in the joints.
Allow any excess material to dry slightly and brush the surface with a hand brush or similar to remove any loose mortar.
Original Meldorfer are a hand-formed, individually manufactured product in which differences in colour shade and dimensional tolerances must be taken into account. To achieve a natural play of colours, local accumulation of the same shades of a colour should be avoided.
In the case of dense, cool substrates or if drying is delayed due to weather conditions, auxiliary substances may reach the surface of the coating due to moisture exposure (rain, dew, mist). The effect depends on the intensity of the colour shade. These auxiliary substances are water-soluble and are removed independently with sufficient water, e.g. after further weathering. The quality of the dried coating is not adversely affected by this.
Please Note (Status as at Date of Publication)
Assessments and Approvals:
German:
Z-33.41-130 Z-33.42-132 Z-33.43-133
Z-33.47-859 Z-33.42-1739
European:
ETA-07/0184 ETA-10/0436 ETA-12/0383
ETA-11/0300 ETA-13/0890 ETA-13/0891
ETA-13/0289
Disposal
Small quantities of waste can be disposed of as normal household waste. Dispose of larger quantities as mixed construction and demolition waste following EWC170 904Customer Service Centre
Tel.: +49 6154 71-71710Fax: +49 6154 71-71711
e-mail: kundenservicecenter@caparol.de
International Distribution: Please see www.caparol.com