Capatect Gewebeeckschutz 656

Edge protecting glas fabric profile with interior backing

LV Texte

Field of Application

Reinforcement fabric angle, used as edge protection and as gauge within the Capatect ETICS Systems A and B.

ETICS = External Thermal Insulation Composite System
  Brit. term: EWI = External Wall Insulation
  Am. term: EIFS = External Insulation and Finish System

For embedding in reinforcing mortars and surfacers:

  • Capatect-Klebe- und Spachtelmasse 190
  • Capatect-Klebe- und Armierungsmasse 186M
  • Capatect-Klebe- und Armierungsmasse 133 Leicht
  • Capatect-ArmaReno 700
  • Capatect-CS-Armierungsmörtel 850
  • Capatect-ZF-Spachtel 699
  • CarbonSpachtel
  • CarboNit

Material Properties

  • Glas fabric angle with synthetic inner side backing
  • Edges can be prepared very exactly
  • Overlaps fabric from both sides - no special fabric folding around the edges
  • Reveals and window leading edges can be treated in one step
  • High standard glas fabric quality made from Capatect-Gewebe 650


Packaging/Package Size

Carton containing 40 bars
Product - No. 

 Leg (side) length [ mm ]

bar length [ m ]total length /Carton [ m ]
656/02 100 / 150 2.5100
657/02 100 / 230 2.5100




Dry, protected from moisture

Substrate Preparation

Leading edges of insulation boards  must be cut accurately. The surface must be clean, dry, firm/solid, sound and free from all material that may prevent good adhesion.

Method of Application

Place the Capatect-Gewebe-Eckschutz (edge protecting profiles) along the edges fully embeded (not fixed by spots) into the reinforcement mortar. Overlap fabric in bar joints for 10 cm. Do not double inner side backing (can easy be cut).

For reinforcing of reveals cut glas fabric leg into reveals depth (3 leg width available; see  above) 

Place the over-all reinforcing fabric Capatect-Gewebe 650/110 with an overlapping of 10 cm to the Capatect-Gewebe-Eckschutz at both sides. Do not fold it arround the edge.


per m: 1,0 [ m ]

Application Conditions

See Technical Information of the used reinforcement mortar.


Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities. Particular attention should be paid to removing wastage from site in compliance with standard construction site procedures.

For EU: Dispose material residues as per EWC (European Waste Cataloque) 101103 (old glas fibre materials) or according to EWC 170904 (mixed construction and demolition waste).

Customer Service Centre

Tel.: (+49) 0 61 54 / 71 17 10
Fax: (+49) 0 61 54 / 71 17 11

International Distribution: Please see