Field of Application
Additional reinforcement for Capatect ETICS Systems A and B for areas of facades with high mechanical impact loads.Material Properties
- Shear-resistant
- Alkali-resistant
- Free of plasticiser
- Trimmed edge
- Mesh size 5,5 x 5,0 mm
Packaging/Package Size
roll of 25 m , 100 cm wide
Colours
OrangeStorage
Dry
Area-related mass
340 [ g/m2 ] ± 5 % as per DIN 53854Product No.
652Consumption
per m2: 1,0 [ m2 ]Application
Apply the system-related reinforcement mortar in the width of Capatect-Panzergewebe 652 onto the thermal insulating boards using a smoothing stainless steel trowel.
Wet layer thickness approx. 2 [ mm ] (about 2.0 [ kg/m2 ]).
Embed the Capatect-Panzergewebe 652 into this mortar (blunt adjoined - not overlapping!) and pull the reinforcing material through the tissue sharply off with the trowel. Smooth the mortar to zero along the fabric border.
Reinforce the complete surface wet on wet with the full-scale reinforcement fabric Capatect-Gewebe 650/110 over all as usual .
Disposal
Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities. Particular attention should be paid to removing wastage from site in compliance with standard construction site procedures.
For EU: Dispose material residues as per EWC (European Waste Cataloque) 101103 (old glas fibre materials) or according to EWC 170904 (mixed construction and demolition waste).
Customer Service Centre
Tel.: +49 6154 71-71710Fax: +49 6154 71-71711
e-mail: kundenservicecenter@caparol.de
International Distribution: Please see www.caparol.com