caparol_pim_import/caparol_de/products/image/264704/070534_SeidenLatex_12_5L.png

SeidenLatex

Emission-minimised quality for satin-finished interior paint coatings.

    • LV Texte

    Field of Application

    For highly durable, scrub-resistant and texture-retaining interior paint coatings with a satin-gloss surface. Particularly suitable for surfaces subjected to excessive wear, e.g. in schools, hospitals, play rooms, public buildings, offices, halls, hotels, restaurants, staircases, etc., since the coating is hard-wearing and may easily be cleaned.

    In addition, the product is particularly suitable for coating woodchip/ingrain wallpapers, relief and embossed wallpapers, as well as for glass fabric wall coverings to highlight the texture by a silky gloss.

    Material Properties

    • Water-dilutable, ecologically compatible, low odour.
    • High degree of whiteness.
    • Diffusion-capable.
    • sd-value < 0.3 m
    • Excellent cleaning properties and resistant to aqueous disinfectants and household detergents.
    • Easy to apply.
    • Alkali resistant, hence unsaponifiable.

    Material Base / Vehicle

    Synthetic latex according to German standard DIN 55945.

    Packaging/Package Size

    • Standard Products: 2.5 l, 5 l, 10 l and 12.5 l.  Airfix: 25 l hobbock, 120 l Paint barrel
    • Off-White (Altweiß): 12.5 l
    • ColorExpress: 2.5 l, 5 l, 7.5 l and 12.5 l

    Colours

    White and Off-White.

    SeidenLatex can be tinted with CaparolColor or AmphiColor® (AVA) colourants. If more than one bucket is manually tinted, all product must be thoroughly mixed before use in order to avoid colour differences. Quantities of 100 litres or more in individual colour shades may be ordered ready-tinted ex factory.
    The product is tintable to all current colour collections via the ColorExpress tinting & mixing machine system. Check tinted paint before applying to avoid colour differences. Always use paint of same batch, when applying on seamless surfaces. If colour shades of low opacity are used, e.g. Red, Orange or Yellow, it is advisable to previously apply one priming coat of Caparol Haftgrund, tinted via ColorExpress technique in a matching priming system colour. Possibly a second finishing coat may be necessary.

    Gloss Level

    Satin-gloss/satin-finished (mid sheen according to DIN EN 13 300)

    Storage

    Keep in a cool, but frost-free place.

    Technical Data

    Characteristics according to DIN EN 13 300: Tinting may cause variations.

    Wet abrasion

    Wet scrub resistance Class 1, corresponds to "scrub resistant" as per German standard DIN 53778

    Contrast ratio

    Opacity (hiding/covering power) Class 2, with a spreading rate of 7 m2/l (consumption: 140 ml/m2)

    Maximum particle (grit) size

    Fine (< 100 µm)

    Density

    Approx. 1.35 g/cm³

    Supplementary Product

    Disbopur 458 PU-AquaSiegel: The mechanical and chemical stressability of product is significantly enhanced by two additional sealing coats of Disbopur 458 PU-AquaSiegel.
    Application is only possible for light (pastel) shades of luminosity/lightness index (LI) approx. 100 - 60. Protective sealing leads to a considerably matt (flat) surface and slight colour deviation may occur.
    Particularly on Capaver® glass fabrics highly stressable surfaces can be achieved. A slight yellowing may occur, if glass fabrics of other manufacturers are used.

    Suitability according to Technical Information No. 606 Definition of Application Areas

    Interior 1Interior 2Interior 3Exterior 1Exterior 2
    ++o––
    (–) inapplicable / (○) of limited suitability / (+) suitable

    Suitable Substrates

    The substrate must be clean, sound/stable, dry, and free from all substances that may prevent good adhesion. Germany: Follow VOB, part C, DIN 18363, section 3.

    Substrate Preparation

    Plasters of mortar group PII and PIII/compressive strength according to DIN EN 998-1 with min.
    1.5 N/mm2:     Coat solid, normally absorbent renders without pre-treatment. Prime coarsely porous and absorbentrenders with CapaSol RapidGrund or CapaSol Konzentrat.

    Gypsum plasters of mortar group PIV/compressive strength according to DIN EN 13279 with
    min. 2 N/mm2:     One priming coat of HaftGrund EG. Gypsum plasters with sintered skin: Sand, remove dust, prime with Dupa-Putzfestiger.

    Gypsum boards: Apply one priming coat of CapaSol RapidGrund or CapaSol Konzentrat on
    absorbent boards. Apply one priming coat of HaftGrund EG to highly compacted, smooth boards.

    Gypsum boards (plasterboards): Sand off filler burrs. Strengthen soft gypsum filler areas with Dupa-
    Putzfestiger. Prime with HaftGrund EG, CapaSol RapidGrund or CapaSol Konzentrat. For boards with
    water-soluble, discolouring ingredients, apply one priming coat of Caparol AquaSperrgrund. Observe
    BFS Data Sheet No. 12.

    Concrete: Remove any release agent residues and chalking, sanding substances.

    Aerated concrete: Apply one priming coat of Capaplex, diluted 1 : 3 with water.

    Sand-lime brick and exposed brickwork: Coat without pre-treatment.

    Load-bearing coatings: Recoat matt, slightly absorbent coatings directly. Roughen glossy surfaces
    and lacquer coatings. Apply one priming coat of HaftGrund EG.

    Non-stable coatings: Remove non-stable coatings of lacquer, emulsion paint or synthetic resin
    plaster. Prime slightly absorbent, smooth surfaces with Haftgrund EG. Prime highly porous, sanding or
    absorbent surfaces with CapaSol RapidGrund. Remove non-bearing mineral paint coatings
    mechanically and remove dust from the surfaces. Apply one priming coat of Dupa-Putzfestiger.

    Distemper coatings: Wash off old Distemper coatings. Apply one priming coat of Dupa-Putzfestiger.

    Unpainted woodchip, relief or embossed paper wallpapers: Coat without pre-treatment.

    Non-sticking wallpapers: Remove completely. Wash off paste and waste paper residues. Prime with
    Dupa-Putzfestiger.

    Mould-infested surfaces: Remove mould or fungal infestation by wet cleaning. Wash surfaces with
    Capatox or FungiGrund and allow to dry thoroughly. Apply a priming coat depending on the type and
    condition of the substrate. Apply a top coat of Indeko-W, Malerit-W or Fungitex-W to heavily infested
    surfaces. Observe the legal and official regulations (e.g. the Biological Substances Ordinance and the
    Ordinance on Hazardous Substances).

    Surfaces with nicotine, water, soot or grease stains: Wash off nicotine stains as well as soot or
    grease stains with water using a grease-dissolving household cleaning agent and allow to dry
    thoroughly. Clean dried water stains by brushing dry. Apply a barrier primer coat of AquaSperrgrund.
    Apply the final coat of Aqua-inn Nº1 to heavily soiled surfaces.

    Wood and wood-based materials: Coat with water-thinnable, environmentally friendly Capacryl
    Acryl-Lacken or Capacryl PU-Lacken.

    Small defects: After appropriate preparatory work, repair with Caparol-Akkordspachtel according to
    processing instructions and, if necessary, re-prim.

    Note Q2/Q3 Filling / thin gypsum layers < 0.5mm: When using gypsum-containing, hydraulically
    setting levelling compounds in quality level Q2/Q3, a transparent, water-based primer is
    recommended. For this, we refer to the Maler&Lackierer leaflet No. 2 -9/2020 "Adhesion problems of
    coatings on filled gypsum (cardboard) boards" of the Bundesverband Farbe, Gestaltung, Bautenschutz
    and Federal Committee for Paint and Property Protection. As an alternative to gypsum-based Q3
    filling, filling with pasty filling compounds has proven successful.

     

    Method of Application

    Apply with paint brush, roller and spraying equipment.

    Airless Application:
    Dilutionmax. 5% with Water
    Airless equipment
    Spray pressure180 - 200 bar
    Spray angle40° - 50°
    Nozzle size0,017" - 0,019"
    Pistol filter in MWca. 0,31mm
    Internally fed roller systems
    Spray pressure80 - 120 bar
    Pistol filter in MWca. 0,31mm

     












    Clean tools/equipment immediately after use with water.

    Surface Coating System

    Priming or Intermediate Coat: SeidenLatex, diluted to a max. of 10 % with tap (potable) water.

    Finishing Coat: SeidenLatex, diluted to a max. of 5 % with tap (potable) water.

    Consumption

    Approx. 140 ml/m2 per coat on smooth substrates. On roughly textured surfaces correspondingly more. Determine the exact amount of material required by coating a test area on site.

    Application Conditions

    Low Temperature Limit for Application and Drying:
    +5 °C for product, substrate and ambient air.

    Drying/Drying Time

    At 20 °C and 65 % relative humidity surface-dry and recoatable after 4 - 6 hours. Cured and ready for stress after approx. 3 days. Lower temperatures and higher humidity extend the drying time.

    Note

    To avoid lapping, the material should be applied wet-on-wet and without interruption. When using Caparol Tiefgrund TB in interiors, a typical solvent odour is released, hence proper ventilation must be provided during application and drying. Use non-aromatic, low-odour AmphiSilan-Putz­festiger in sensitive areas. Touching up surfaces is depending on many parameters and may be visible after drying. Germany: See BFS-Merkblatt (Data/Fact Sheet) No. 25.
    Do not use phenol-based disinfectants to avoid surface yellowing.

    Please Note (Status as at Date of Publication)

    Keep out of reach from children. Ensure good ventilation during use and drying. Do not eat, drink or smoke while using the product. In case of contact with eyes or skin, immediately and thoroughly rinse with water. Do not allow product to enter drains, waterways or soil. Clean utensils immediately after use with soap and water. Do not breathe spray dust. Use P2 dust filter for grinding. 
    Further information: See Material Safety Data Sheet (MSDS).

    Contains: 1,2-benzisothiazol-3(2H)-one, 2-methyl-2H-isothiazol-3-one. May produce an allergic reaction.
    Germany: Advice for allergy sufferers with isothiazolinone allergy: Hotline 0180/5308928
    (0.14 €/minute from German landline, MTS max. 0.42 €/minute).

    Disposal

    Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities. Particular attention should be made to removing wastage from site in compliance with standard construction site procedures. 
    Germany: Only completely empty containers should be handed in for recycling. Dispose containers with residues of liquid product via waste collection point accepting old paints and enamels. Dispose dried/hardened product residues as construction site/demolition/municipal or domestic waste.

    EU limit value for the VOC content

    of this product (Category A/a): max. 30 g/l (2010). This product contains max. 1 g/l VOC.

    Product Code Paints and Enamels

    M-DF01 (Germany)

    Substances of Content - Declaration

    Polyacrylic resin, titanium dioxide, silicates, water, additives, film forming agent, preservative (1,2-benzisothiazol-3(2H)-one, 2-methyl-2H-isothiazol-3-one).

    Customer Service Centre

    Tel.: +49 6154 71-71710
    Fax: +49 6154 71-71711
    e-mail: kundenservicecenter@caparol.de

    International Distribution: Please see www.caparol.com

    Product recommendation:

    Details

    DisboPUR W 458 2K-PU-Versiegelung, matt,…

    Details

    Latex Samt 10