CapaMaXX Pro
Modern, preservative-free interior paint with SmartDry technology.
The new generation of preservative-free interior paints. Modern formulation with SmartDry technology for surfaces free of marks, even on smooth substrates and in bright light. Extremely easy to apply and ideal for touching up.
Field of Application
For new and renovation coatings on all interior surfaces. Particularly suitable for use in highly sensitive living and working areas, as there is no odour nuisance during application or drying. CapaMaXX Pro is particularly suitable for smooth surfaces and rooms with strong incidence of light, as it effortlessly achieves surfaces free of roll marks.Material Properties
- Preservative free
- MaXXimum smooth, effortless application
- For even, seamless surfaces
- Optimally repairable
- Minimised emissions and solvent-free
- Free from fogging-active substances
- Diffusible
- High covering power
Material Base / Vehicle
Plastic dispersion according to DIN 55945.Packaging/Package Size
- Standard goods: 5 l, 12,5 l
Colours
White
Light white (corresponds to RAL 9016)
Old white (corresponds to RAL 9010)
CapaMaXX Pro can be tinted by machine in the ColorExpress system from the white product up to a light reference value of approx. 70. In order to detect any tinting errors, please check the colour accuracy before processing. Only use colour shades from one production batch on contiguous surfaces.
Gloss Level
G4 - Dull matt (according to DIN EN 13 300)Storage
Cool but frost free.
Technical Data
Characteristic data according to DIN EN 13 300: Deviations in the technical characteristics are possible due to tinting.Wet abrasion
R-class: 2Contrast ratio
H10-class: 1 at 8 m2/lMaximum particle (grit) size
S1 fine (up to 100 µm)Density
1,47 g/cm3Suitability according to Technical Information No. 606 Definition of Application Areas
| Interior 1 | Interior 2 | Interior 3 | Exterior 1 | Exterior 2 |
| + | + | – | – | – |
| (–) not suitable / (○) limited suitable / (+) suitable | ||||
Suitable Substrates
The substrates must be free of dirt, separating substances and dry. Observe VOB, Part C, DIN 18363, Para. 3.Substrate Preparation
Renders according to DIN EN 998-1 class CS II - CS IV / compressive strength min. 2 N/mm2: Solid, normally absorbent and even renders can be coated without primer coat. Prime slightly sanding, absorbent renders with OptiSilan TiefGrund, CapaSol RapidGrund or Sylitol RapidGrund 111. Prime more sanding renders with OptiSilan TiefGrund.
Gypsum plasters according to DIN EN 13279-1 / compressive strength min. 2 N/mm2: Sand and remove dust from gypsum plasters with sintered skin, prime with OptiSilan TiefGrund, CapaSol RapidGrund or Sylitol RapidGrund 111.
Gypsum boards/gypsum planks: Prime absorbent boards with OptiSilan TiefGrund (for panelling, see also gypsum plasterboard).
Gypsum boards (plasterboards): Gypsum boards (plasterboard): Sand off filler burrs. Prime sanded gypsum filler areas and the gypsum boards with OptiSilan TiefGrund, CapaSol RapidGrund or Sylitol RapidGrund 111. In case of stronger absorption, prime with OptiSilan TiefGrund. For boards with water-soluble, discolouring ingredients, prime with Caparol AquaSperrgrund. Observe BFS Data Sheet No. 12, Part 2.
Concrete: Remove any release agent residues and chalking, sanding substances. Prime with OptiSilan TiefGrund, CapaSol RapidGrund or Sylitol RapidGrund 111.
Load-bearing coatings: Recoat matt, slightly absorbent coatings directly. Roughen glossy surfaces and paint coatings.
Non-bearing coatings: Remove non-stable varnish and dispersion paints or synthetic resin plaster coatings. Prime coarsely porous, sanding or absorbent surfaces with OptiSilan TiefGrund. Remove non-bearing mineral paint coatings mechanically and remove dust from the surfaces. Apply one priming coat of OptiSilan TiefGrund.
Distemper coatings: Wash off with primer. Apply a primer coat with Dupa Plaster Strengthener. Alternatively, remove mechanically, rinse and prime with OptiSilan TiefGrund.
Woodchip, relief or embossed paper wallpaper, non-adhesive wallpaper: Remove completely. Wash off paste and waste paper residues. Prime with OptiSilan Deep Primer.
Surfaces with nicotine, water, soot or grease stains: Wash off nicotine stains as well as soot or grease stains with water, adding a grease-dissolving cleaning agent, and allow to dry thoroughly. Clean dried water stains by brushing dry. Apply a barrier priming coat of Caparol AquaSperrgrund fein (see Technical Information No. 384) or Caparol-Filtergrund grob (see Technical Information No. 845).
Wood and wood-based materials: Apply one priming coat of Capacryl Holz-Isogrund. On boards factory-coated with melamine resin, apply one priming coat of Capacryl-Haftprimer. The joint areas/ panel joints are not to be finished crack-free. Here, for higher visual requirements, a decoupling layer with thin gypsum boards with appropriate filling is recommended.
Old lime filler techniques: Remove sintered layer on the surface by sanding. In case of negative wetting test with water on sanded surface, the entire lime filler layer must be removed and the substrate must be rebuilt accordingly. In case of positive wetting test with water on sanded surface, prime with OptiSilan TiefGrund.
Chips, joints and defects: Fill deep holes accordingly.
Note Q2/Q3 Filling / thin gypsum layers < 0.5 mm: When using gypsum-containing, hydraulically setting levelling compounds in quality level Q2/Q3, a transparent, water-based primer is recommended. For this, we refer to the Maler&Lackierer leaflet No. 2 -9/2020 "Adhesion problems of coatings on filled gypsum (cardboard) boards" of the Bundesverband Farbe, Gestaltung, Bautenschutz and the Bundesausschuss Farbe und Sachwertschutz. As an alternative to gypsum-based Q3 filling, filling with pasty filling compounds has proven successful.
Method of Application
Zu verarbeiten mit Pinsel, Rolle und Airlessgeräten.Airless application:
| Dilution | max. 5% with water |
| Airless equipment | |
| Spray pressure | 150 - 180 bar |
| Spray angle | 40° - 50° |
| Nozzle size in Inch | 0.019" - 0.021" |
| Pistol filter in MW | ca. 0.31 mm |
| Internally fed roller systems | |
| Spray pressure | 80 - 120 bar |
| Pistol filter in MW | ca. 0.31 mm |
Clean tools after use with water.
Surface Coating System
A rich, even coat with CapaMaXX Pro undiluted or diluted with max. 5 % water. On high-contrast surfaces, apply a previous primer coat diluted with max. 5 % water. On differently absorbent substrates, apply a primer coat of Caparol Haftgrund EG.Consumption
Approx. 125 ml/m2 per coat on smooth surfaces. Correspondingly more on rough surfaces. Determine exact consumption by test coating.Application Conditions
Lower temperature limit for application and drying: +5 °C for circulating air and substrate.Drying/Drying Time
Surface dry and recoatable after 4-6 hours at +20 °C and 65 % relative humidity. Completely dry and loadable after approx. 3 days.
These times are longer at lower temperatures and higher humidity.
Note
Coat wet-on-wet in one go to avoid build-up. For airless spraying, stir the paint well and sieve. When using Caparol-Tiefgrund TB indoors, a typical solvent odour may occur. Therefore ensure good ventilation. For surfaces with unfavourable lighting conditions (grazing light), we recommend using the product CapaSilan. With dark colours, mechanical stress (scratching) can lead to light streaks. We recommend an additional colour-matching protective coating with PremiumColor for mechanically stressed surfaces with intensive colour tones. Please refer to the PremiumColor technical information. Markings from touch-ups on the surface depend on many factors and are therefore unavoidable (BFS Merkblatt 25).Special Risks (Hazard Note) / Safety Advice (Status as at Date of Publication)
If medical advice is required, have packaging or labelling ready. Keep out of the reach of children. Caution! Spraying may produce hazardous respirable droplets. Do not inhale aerosol or mist. When spraying, use a face mask with particle filter P2 against spray mist.Disposal
Dispose of liquid material residues at the collection point for old paints/varnishes, dispose of dried material residues as construction and demolition waste or as municipal waste or domestic waste.EU limit value for the VOC content
of this product (Cat. A/a): 30 g/l (2010). This product contains < 1 g/l VOC.
Giscode
BSW10Substances of Content - Declaration
Polyacrylate resin, alkali water glass, silicates, titanium dioxide, calcium carbonate, water, additives.Customer Service Centre
Tel.: +49 6154 71-71710Fax: +49 6154 71-71711
e-mail: kundenservicecenter@caparol.de
International Distribution: Please see www.caparol.com