Special primer formula within the product range Capatect SPRINTER qualities in the specified temperature range; see application conditions. Do not mix with regular quality. Do not use in unsuitable weather & temperature conditions.
Field of Application
Synthetic resin emulsion paint, for use as priming coat and bonding bridge before applying textured render coatings:
– for Capatect ETICS systems,
– for Capatect-VHF (Cladding) System,
– on uncoated concrete,
– on existing mineral renders and plasters, rendering of mortar groups/classes PII and PIII according
to German standard DIN 18550 or similar,
– on matt, sound and stable coats of emulsion paint,
– on sound and stable mineral coatings.
Material PropertiesReaction to fire (German classification): "nichtbrennbar” (non-combustible) or
"schwerentflammbar” (flame-retardant), depending on the applied ETICS or Capatect-VHF (Cladding) system.
- Solidifies the surface of substrates.
- Enhances adhesion.
- Levels the absorption-capacity.
- Easy to apply.
- Ecologically, environmentally compatible.
Material Base / VehicleSynthetic resin emulsion according to German standard DIN 55945.
Packaging/Package Size25 kg
StorageKeep in a cool, but frost-free place. Shelf life: max. 6 months.
Note: The product must be applied during the current winter season.
Approx. 1.4 g/cm3
Product No.610 SPRINTER
Substrate PreparationThe substrate must be even, clean, dry, solid, sound, stable and free from all substances that may prevent good adhesion, also frost- and ice-free.
New rendering must be allowed to fully cure for minimum 2 - 4 weeks.
Follow Technical Information No. 650 "Substrates and their preparation" relating to essential pretreatment of substrates.
Germany: Follow VOB, part C, DIN 18 363, section 3.
ConsumptionApprox. 350 g/m2 on smooth substrates, according to substrate properties and application technique. On roughly textured surfaces correspondingly more.
Determine the exact amount of material required by coating a test area on site.
Temperature Limits for Application and Curing:
+1 °C up to max. +15 °C for ambient air (relative humidity < 90 %), substrate and product. Limits are to be observed during the curing phase for at least 4 hours. Thereafter the priming coat is resistant against drizzle and mild frost conditions (- 5 °C as limit).
ToolsPutzgrund 610 SPRINTER formula is applicable by paint brush, roller or suitable spraying equipment.
Keep tools during breaks dipped in the paint bucket or under water.
Tool CleaningClean tools immediately after use with water.
NoteDo not apply Putzgrund 610 SPRINTER on horizontal surfaces exposed to rain or water.
Please Note (Status as at Date of Publication)Keep out of reach of children. Ensure good ventilation during use and drying. Do not eat, drink or smoke while using the pro duct. In case of contact with eyes or skin, immediately and thoroughly rinse with water. Do not allow product to enter drains, waterways or soil. Clean utensils immediately after use with soap and water. Do not breathe spray dust.
Further information: See Material Safety Data Sheet (MSDS).
Contains: Benzisothiazolone, mixture of chloromethylisothiazolone and methylisothiazolone (3: 1), methylisothiazolone.
May produce an allergic reaction. Germany: Hotline for allergy requests and technical
consultations: 0800/1895000 (free of charge from the German landline).
DisposalMaterials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities. Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.
In Germany: Only completely empty containers should be handed in for recycling. Dispose containers with residues of liquid product via waste collection point accepting old paints and enamels. Dispose dried/hardened product residues as construction site and demolition waste or municipal/domestic waste.
EU limit value for the VOC contentof this product (category A/h): max. 30 g/l (2010). This product contains max. 25 g/l VOC.
Product Code Paints and Enamels
Substances of Content - Declaration
Polyacrylate resin, silicates, calcium carbonate, titanium dioxide, aluminum hydroxide, water, glycol ethers, additives, preservatives (methyl / benzisothiazolinone, mixture of chloromethyl / methylisothiazolinone (CIT / MIT 3: 1).
Customer Service CentreTel.: +49 6154 71-71710
Fax: +49 6154 71-71711
International Distribution: Please see www.caparol.com