Field of Application
Synthetic resin filling compound for filling (stopping) of wood, primed metals and non-alkaline plasters.
- High filling properties.
- Minor shrinking.
- Directly overcoatable.
Material Base / VehicleSynthetic resin combination.
250 g tube; 800 g can
Keep in a dry and cool, but frost-free place.
DensityApprox. 1.9 g/cm3
Suitability according to Technical Information No. 606 Definition of Application Areas
|Interior 1||Interior 2||Interior 3||Exterior 1||Exterior 2|
|(–) inapplicable / (○) of limited suitability / (+) suitable|
Suitable SubstratesPrimed wood, metals and existing non-alkaline plasters with sufficient strength. On wooden surfaces outdoors do only smoothen to achieve pore-filling or apply for repairs of small damaged spots.
In Germany: Smoothening of plain surfaces made of wooden components outdoors is not permitted, as per BFS Data Sheet No. 18.
Smoothen only on small scale spots of metal surfaces - outdoors.
Apply only on interior plaster surfaces.
The substrate must be sound/stable, dry and clean.
|Untreated wood||Capalac Vorlack|
Capalac Holz-Imprägniergrund (only for exteriors)
|Stable existing enamel coatings||Capalac Vorlack |
or Disbon 481 EP-Uniprimer
|Iron, steel||Capalac Rostschutzgrund |
or Capalac AllGrund
Method of ApplicationCapalac LackSpachtel can be applied repeatedly, wet-on-wet in multiple layers per day, by using a suitable squeegee. The maximum wet-layer thickness per working day should not exceed 700 µm. For patch-filling always one priming coat is necessary before applying the final coat (finish varnishing).
Surface Coating SystemCapalac LackSpachtel can be coated with synthetic lacquers and dispersion/emulsion enamels of the Caparol Group of Companies.
Application ConditionsWorking/Processing Temperatures:
Min. 15 °C and max. 30 °C for product, ambient air and substrate.
Drying/Drying TimeAt 20 °C and 60 % relative humidity recoatable after o/n drying (wet-layer thickness of max. 700 µm per working day).
Please Note (Status as at Date of Publication)Keep out of reach of children. Avoid release to the environment.
IF ON SKIN: Wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Contains: acetone oxime. May produce an allergic reaction.
Further information: See Material Safety Data Sheet (MSDS).
DisposalMaterials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities. Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.
In Germany: Only completely empty containers (tubes/cans) should be handed in for recycling. Contaminated packaging: Dispose of contents/container to an approved incineration plant.
EU limit value for the VOC contentGermany: This product is not subject to the VOC limit values.
Product Code Paints and EnamelsM-DF02 (Germany)
Customer Service CentreTel.: (+49) 0 61 54 / 71 17 10
Fax: (+49) 0 61 54 / 71 17 11
International Distribution: Please see www.caparol.com