DisboCRET 760 Baudispersion

Synthetic dispersion additive for cement-bound mortars, surfacers, renders/plasters and screeds to improve fresh and hardened mortar characteristics.

Downloads

Field of Application

Additive to improve cement-bound mortars, surfacers, renders/plasters and composition-floors (screeds).
Primer for absorbent, mineral substrates.

Material Properties

The fresh and hardened mortar properties of cement-bound mortars, surfacers, renders/ plasters and screeds are improved concerning

Water and moisture retention capacity
Workability
Water-saving
Water-cement ratio
Adhesion
Shrinkage
Elastic deformation

Material Base / Vehicle

Polymer resin dispersion

Packaging/Package Size

10 l can

Storage

Keep in a cool and frost-free place.
Shelf life of the original, tightly closed packaging: min. 12 months.

Density

approx. 1.0 g/cm³

Solids content

approx. 35 % by weight

Suitable Substrates

For priming of cement-bound, mineral substrates, such as concrete, screeds, renders/ plasters, mortars and surfacers.

Substrate Preparation

Prepare the substrate by suitable means according to the intended use of Disbon 760 Baudispersion and corresponding standards and guidelines.

Mixing Ratio

(All values are reference values only)

Application	Cement : Sand	Disbon 760 Baudispersion : Water
Priming^✱	–	1 : 5 parts by weight
Bonding bridge^✱^✱	1 : 1 parts by weight	1 : 1 parts by weight
Cement plaster^✱^✱	DIN 18 550	1 : 4-5 parts by weight
Cement screed^✱^✱	DIN 18 550	1 : 4-5 parts by weight
Bedding mortar^✱^✱	1 : 3 parts by weight	1 : 5 parts by weight

^✱	Primers must not form a glossy surface.
^✱^✱	The composition, preparation, application and after treatment of cement-based mortars, surfacers, renders/plasters and screeds must be implemented in accordance with relevant standards and guidelines.

Consumption

Priming coat	approx. 70–100 ml/m²
Mortar etc.	approx. 35–250 ml/mm/m²

The exact rate of consumption is best established by a trial application or suitability test.
(All values are reference values only)

Application Conditions

Material, atmospheric, and substrate temperature:
Min. 8 °C, max. 30 °C during application and drying.

Tool Cleaning

Immediately after use with water.

Please Note (Status as at Date of Publication)

Keep out of reach from children. Use P2 dust filter for grinding. Ensure good ventilation during use and drying. Do not eat, drink or smoke while using the paint. In case of contact with eyes or skin, immediately and thoroughly rinse with water. Do not allow product to enter drains, waterways or soil. Clean utensils immediately after use with soap and water. For further information see Material Safety Data Sheet (MSDS).

Disposal

Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities. Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.
In Germany: Only completely emptied containers should be given for recycling. Dispose containers with residues of liquid material as remnants of water-based paints and dried material as hardened paints waste or via domestic waste.

EU limit value for the VOC content

of this product (category A/a): max. 30 g/l (2010). This product contains < 1 g/l VOC.

Product Code Paints and Enamels

M-GF01

Further Details

Follow the application recommendation while applying our products.

Customer Service Centre

Tel.: +49 6154 71-71710
Fax: +49 6154 71-71711
e-mail: kundenservicecenter@caparol.de

International Distribution: Please see www.caparol.com