Field of Application
Ready-to-use, emulsion based adhesive/glue for bonding all types of Capaver AkkordVliese (non-woven glass fleeces) and glass fabrics.Material Properties
- Ready-to-use for spray application.
- Perfectly suited for use with wallpaper pasting machines.
Packaging/Package Size
- 10 kg
Colours
- Transparent
Storage
Keep in a cool, but frost-free place.Keep partially used containers/buckets tightly closed.
Suitability according to Technical Information No. 606 Definition of Application Areas
Interior 1 | Interior 2 | Interior 3 | Exterior 1 | Exterior 2 |
+ | + | ○ | – | – |
(–) inapplicable / (○) of limited suitability / (+) suitable |
Substrates
The substrate must be solid (sound/stable), dry, clean, even and free from all substances that may prevent good adhesion. Follow Technical Information No. 650.In Germany: Follow supplementary information given in VOB, part C, DIN 18363, section 3.
Method of Application
Applicable with paint brush, roller and airless spray equipment.Airless Application:
Spray angle: 40° - 50°
Nozzle size: 0.017" - 0.019"
Pressure: 180 - 200 bar
The airless applied product should always be rolled over with a lambskin roller (12 to 14 mm piles) to obtain an even and proper coat of glue.
Bonding Technique:
Apply the product liberally and evenly to the substrate in the width of approx. 1 to 3 lengths, using lambskin roller or airless equipment. Then apply the fleece or glass fabrics without delay and carefully press on with a wallpaper scraper or roller, avoiding blistering. On slightly absorbent substrates and at low temperature or high relative humidity: Allow the glue to flash off sufficiently before applying fleeces or glass fabrics.
Surface Coating System
Application:Always follow the corresponding Technical Information before applying the wall covering.
Consumption
Glass Fabrics:
Finely textured glass fabrics and fleeces: approx. 150 g/m2
Medium textured: approx. 100 - 250 g/m2
Determine the exact amount of material required by coating a test area on site.
Application Conditions
Lower Temperature Limit for Application and Drying:+5 °C for product, substrate and ambient air.
Drying/Drying Time
At +20 °C and 65 % relative humidity surface-dry and recoatable after approx. 6 - 12 hours.Thoroughly dry after approx. 3 days. Lower temperatures and higher relative humidity extend the drying time.
Note
Bonding of Capaver AkkordVliese: High material consumption may lead to the opening of edgings and should be avoided.
Reworking of gypsum fillers/surfacers: Provide for fast drying by means of sufficient ventilation and temperature to avoid swelling, blistering and spallings caused by long-lasting exposure to moisture.
In Germany: Follow Data Sheet No. 2 "Verspachtelung von Gipsplatten" (Filling gypsum boards), Bundesverband der Gips- und Gipsplattenindustrie (German Association of Gypsum Plasterboard
Industry).
Please Note (Status as at Date of Publication)
Keep out of reach of children. Avoid release to the environment. IF ON SKIN: Wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.Further information: See Material Safety Data Sheet (MSDS).
Disposal
Only completely emptied containers should be given for recycling. Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities. In Germany: Dispose containers with residues of liquid product via waste collection point accepting old paints and enamels. Dispose dried/hardened product residues as construction site/demolition/municipal or domestic waste.
Giscode
D1 (Germany)Substances of Content - Declaration
Polyvinyl acetate resin, water, additives, preservative.Customer Service Centre
Tel.: +49 6154 71-71710Fax: +49 6154 71-71711
e-mail: kundenservicecenter@caparol.de
International Distribution: Please see www.caparol.com