Field of ApplicationMoisture regulating window coating system for exterior and interior use, suitable as priming, intermediate and finishing coat.
On folding shutters the use of Capadur Color Wetterschutzfarbe is recommended, due to the oftentimes adverse constructional conditions. Do not apply on timber framing or wooden facades.
Due to the product typical odour, the use of Capacryl PU-Satin is recommended for extended indoor applications.
- Elegant and easy application.
- Moisture regulating.
- Good edge-covering properties.
- Resistant to normal household detergents and short-time resistant to weak acids and alkalis.
- Free of aromatic hydrocarbons.
Material Base / VehicleAlkyd resin, solvent based, free of aromatic hydrocarbons.
- Standard Colour White:
375 ml, 750 ml, 2.5 litres, 10 litres
1 litre, 2.5 litres, 10 litres
Tintable via the ColorExpress (Capalac mix) tinting & mixing machine system.
When applying the product in colour shades of low opacity, e.g. red, orange or yellow, it is advisable to previously apply one priming coat, tinted in a matching priming system colour.
Priming system colours are available via ColorExpress for the following products: Capalac Venti, Capalac AllGrund, Capalac Vorlack and Capalac GrundierWeiß.
Please Note: If necessary, apply one sealing coat of clear coating material Capalac Kunstharz-Klarlack on coatings in intensive or deep/dark colours, to prevent a slight abrasion of pigments.
Note: The typical yellowing of alkyd resins may occur on white and light/bright colours and cannot be objected (caused by low UV radiation, heat or chemical influences due to e.g. ammonia vapour from cleaning agents, adhesives, paint or sealing compounds).
Colour Resistance according to BFS Data Sheet No. 26:
Binder: Class B
Pigmentation: Group 1 to 3, depending on the colour.
Gloss LevelSatin-gloss/satin-finished (mid sheen)
StorageKeep in a cool place, in tightly closed can/container.
DensityApprox. 1.25 g/cm3
Suitability according to Technical Information No. 606 Definition of Application Areas
|Interior 1||Interior 2||Interior 3||Exterior 1||Exterior 2|
|(–) inapplicable / (○) of limited suitability / (+) suitable|
Suitable SubstratesDimensionally stable and limited stable wooden component parts.
Substrates must be clean, sound/stable, dry and free from all substances that may prevent good adhesion.
Max. permissible moisture content in dimensionally stable wood: 13 %; in limited stable wood: 15 %.
New Wooden Parts:
Sand/grind the surface in fibre direction, clean thoroughly, remove seeping wood contents, e.g. wood resin/rosin and resin galls/pitch pockets, cut sharp edges (see BFS Data Sheet No. 18).
Existing, Untreated Wood:
Sand/grind off greyed, weathered surfaces to the stable, solid substrate and clean the surface thoroughly. Cut sharp edges (see BFS Data Sheet No. 18).
Remove all unstable existing coatings completely to the stable substrate. Roughen/sand and clean the surface of existing, adherent coatings.
Method of ApplicationGuideline for Spray Application:
|Ø Nozzle||Pressure||Thinning||Material Temperature|
|Aircoat-Tempspray||0.011 - 0.013 inch||180 - 200 bar||ready to use||35 °C|
Spraying with Aircoat is possible in consistency of delivery when the product is heated before use (Tempspray). Capalac Venti is applicable with varnish brush or roller and is ready for use.
Surface Coating System
|Substrate||Use||Substrate Preparation||Impregnation||Priming Coat||Intermediate Coat||Finishing Coat|
|Wood, derived materials||interior||sanding||–||Capalac Venti||Capalac Venti||Capalac Venti|
|Wood||exterior||BFS Data Sheet No. 18||Capalac Holz-Imprägnier-Grund||Capalac Venti||Capalac Venti1)|
|Stable, existing paint coatings||interior/|
|sanding/treatment with alkali||–2)||Capalac Venti|
Capalac Ventiif necessary
|1)||Apply two intermediate coats on dimensionally stable wood component parts, as per BFS Data Sheet No. 18. Accordingly, apply an impregnation, priming, and intermediate coat before installation and an intermediate and finishing coat after installation.|
Please follow BFS Data Sheet No. 18 (Germany).
|2)||Defective areas of existing paint coatings (visible wood/timber) must be impregnated with Capalac Holz-Imprägniergrund. The interior surfaces of outer windows and doors belong to the exterior surfaces and may also be impregnated inside (on all sides) with Capalac Holzimprägniergrund.|
|Brush Application||Roller Appliation||Spraying (Aircoat)|
|Consumption ml/m2/per coat||100 - 110||90 - 100||130|
Consumption is a reference value only and may vary, depending on the substrate and its condition. Determine the exact amount of material required by coating a test area on site.
Application ConditionsLower Temperature Limit for Application and Drying:
Min. 5 °C for product, substrate and ambient air.
|At 20 °C and 65 % relative humidity||Dust Dry||Touch Dry||Recoatable (brush)||Recoatable (spraying)|
|after hours||3||6 - 7||4 - 6||6|
Lower temperatures, higher humidity and higher layer thickness (higher consumption) extend the drying time.
Tool CleaningImmediately after use with white spirit/turpentine substitute.
Special Risks (Hazard Note) / Safety Advice (Status as at Date of Publication)
Capalac Venti white and Capalac mix Venti white:
Flammable liquid and vapour. Harmful to aquatic life with long lasting effects. Keep out of reach of children. Keep away from open flames/hot surfaces. - No smoking. Do not breathe vapours/ spray. Do not get in eyes, on skin, or on clothing. Use only outdoors or in a well-ventilated area. Avoid release to the environment. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
Contains: butanone oxime, Bis(1,2,2,6,6-pentamethyl-4-piperidyl)sebacate, Methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate. May produce an allergic reaction.
Capalac Venti transparent:
Flammable liquid and vapour. Harmful to aquatic life with long lasting effects. Repeated exposure may cause skin dryness or cracking. Keep out of reach of children. Keep away from open flames/hot surfaces. - No smoking. Do not breathe vapours/ spray. Do not get in eyes, on skin, or on clothing. Use only outdoors or in a well-ventilated area. Avoid release to the environment. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
Contains: butanone oxime, Bis(1,2,2,6,6-pentamethyl-4-piperidyl)sebacate, Methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate. May produce an allergicreaction.
DisposalMaterials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities. Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.
In Germany: Only completely empty containers should be handed in for recycling. Dispose containers with residues of liquid product via waste collection point accepting old paints and enamels. Dispose dried/hardened product residues as construction site/demolition/municipal or domestic waste.
EU limit value for the VOC contentof this product (category A/d): max. 300 g/l (2010). This product contains max. 300 g/l VOC.
Product Code Paints and EnamelsM-LL01 (Germany)
Substances of Content - Declaration
Capalac Venti white and Capalac mix Venti white:
Alkyd resin, titanium dioxide, calcium carbonate, silicates, aliphates, additives
Capalac Venti transparent:
Alkyd resin, calcium carbonate, silicates, aliphates, additives
Further DetailsSee Material Safety Data Sheets (MSDS).
Customer Service CentreTel.: +49 6154 71-71710
Fax: +49 6154 71-71711
International Distribution: Please see www.caparol.com