Fungizid

Preparation of Material

Dosing
One bottle of Fungizid has to be added per paint bucket (12.5 l). This complies with a concentration of approx. 6 % Fungizid.

Tinted facade paints: Fungizid should only be added, when the material is fully tinted and thoroughly mixed.

Surface Coating System

Always follow the manufacturer's instructions for processing of the corresponding facade paint, when Fungizid is added. Remove existing fungi (mildew/mould) and algae growth on exterior surfaces thoroughly by water-jet, in compliance with the regulations. Pretreat cleaned surfaces with Capatox or FungiGrund and allow to dry well.
Always apply two coats of materials with active agent content.

Consumption

750 ml of Fungizid per 12.5 l bucket.
This complies with approx. 9 ml/m² of Fungizid. Applied quantity: approx. 150 ml/m² per coat.

Application Conditions

Low Temperature Limit for Application and Drying:
+ 5 °C for product, substrate and ambient air.

Note

Fungizid is a product provided with special active agents, effective against fungicidal (mould build-up) & algicidal/algae growth on facades.
The agent content provides a long lasting, but only temporary protection, with a time limit depending on special conditions/loads on site, e.g. intensity of attack and moisture stress. Hence a durable protection against fungi and algae growth is impossible.

Special Risks (Hazard Note) / Safety Advice (Status as at Date of Publication)

Restricted to professional users. Use biocides safely. Always read the label and product information before use.

May cause an allergic skin reaction. Toxic to aquatic life with long lasting effects. Keep out of reach of children. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of water. IF SWALLOWED: Seek medical advice immediately and show the container or label (intestinal bacteria can be affected). Apply by brush or paint roller only.

This product is a biocidal product of product type (PT 7) / "Filmschutzmittel" (film protective agent).
German Register No. (BAuA): N-65650
Active agent in g/l of product: Isoproturon (5.0), Terbutryn (3.2), Zink pyrithione (1.4), Octyl-isothiazolone (1.5).

Disposal

Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities. Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.
In Germany: Only completely empty containers should be handed in for recycling. Dispose containers with residues of liquid product via waste collection point accepting old paints and enamels. Dispose dried/hardened product residues as construction site/demolition/municipal or domestic waste.

Product Code Paints and Enamels

M-DF02F (Germany)

Substances of Content - Declaration

Acrylic resin dispersion/emulsion, water, film forming agent, additives, preservative, active substances (Terbutryn, Zinc pyrithione, Octylisothiazolinone, Isoproturon).

Further Details

See Material Safety Data Sheet (MSDS).

Customer Service Centre

Tel.: +49 6154 71-71710
Fax: +49 6154 71-71711
e-mail: kundenservicecenter@caparol.de

International Distribution: Please see www.caparol.com