Field of ApplicationSpray enamel (aerosol/spray paint) for shortwork painting on smaller surfaces of wood, derived timber products, iron, steel, zinc (galvanised surfaces), aluminium, copper, rigid (unplasticised) PVC, and sound/stable existing interior and exterior coatings.
Capalac Disboklar 782: Transparent clear coat on numerous substrates and for protective sealing.
Capalac Metallgrund 783: Corrosion-inhibiting primer on iron and steel, particularly suitable for angled and hardly approachable component parts. To be used before applying Capalac Disbocolor 781.
- Excellent adhesion.
- Protects against corrosion (Capalac Metallgrund 783).
- High colour stability (Capalac Disbocolor 781).
- High stability of gloss.
- Easy to clean.
Material Base / VehicleMethacrylate, solvent-based.
Packaging/Package Size400 ml spray/aerosol cans
- Capalac Disbocolor 781 Gloss:
Zinc Yellow RAL 1018, Fire Red RAL 3000, Gentian Blue RAL 5010, Pebble Grey RAL 7032,
Light Grey RAL 7035, Black RAL 9005, White approx. RAL 9010
- Capalac Disbocolor 781 Silk-matt:
- Zinc Yellow RAL 1018, Fire Red RAL 3000, Gentian Blue RAL 5010, Leaf Green RAL 6002, Anthracite Grey RAL 7016, Pebble Grey RAL 7032, Light Grey RAL 7035, Nut Brown RAL 8011, Black RAL 9005, Silver approx. RAL 9006, White approx. RAL 9010, Gold, Rallye Black
- Capalac Disboklar 782: Transparent
- Capalac Metallgrund 783: Red Brown
Colour Stability as per German BFS-Merkblatt (Data/Fact) Sheet No. 26:
Binding agent/Vehicle: Class A
Pigmentation: Group 1 to 3, depending on the colour.
- Capalac Disbocolor 781 / Capalac Disboklar 782:
Gloss and silk-matt (mid-sheen) as per DIN EN 13 300
- Capalac Metallgrund 783:
Matt as per DIN EN 13 300
StorageKeep in a cool place, always with attached protective cap.
DensityApprox. 0.7 g/cm3
Suitability according to Technical Information No. 606 Definition of Application Areas
|Interior 1||Interior 2||Interior 3||Exterior 1||Exterior 2|
|(–) inapplicable / (○) of limited suitability / (+) suitable|
Suitable SubstratesWood, derived timber products, iron, steel, zinc (galvanised surfaces), aluminium, copper, rigid/unplasticised PVC, mineral substrates as e.g. render, concrete, fibre-cement and stable existing coatings. Do not apply on anodised aluminium. The substrate must be clean, solid, sound/stable, dry and free from all substances that may prevent good adhesion. Wood moisture content (WMC) must not exceed 12 % for softwood and 15 % for hardwood, on an average.
Substrate PreparationWooden Parts
Sand the surface in fibre direction, clean thoroughly, remove seeping wood contents, e.g. wood resin/rosin and resin galls, cut sharp edges. Germany: See BFS-Merkblatt (Data/Fact) Sheet No. 18.
Clean surfaces thoroughly. In particular remove all residues of oil and fat/grease using e.g. cellulose/nitro-thinner. Remove rust and scales by suitable means according to industry standard (metallic bright), e.g. by sanding/grinding or blasting. Then apply the rust-inhibiting primer (783) without delay onto the dry substrate.
Zinc (Galvanised Steel), Unplasticised/Rigid PVC
Wash with light ammonia solution using sanding pad as per BFS-Merkblatt (Data/Fact Sheet) Nos. 5 and 22.
Clean with Gescha Multi-Star or destined detergent using sanding pad as per BFS-Merkblatt (Data/Fact Sheet) No. 6.
Existing Coats of Paint:
Roughen/sand the surface of existing coats slightly and/or treat with alkali. Remove unstable coats. Always check for soundness and compatibility.
Method of ApplicationApplication:
Shake the spray/aerosol can well before use (at least for 1 minute). The inside metal ball must be audible. For spraying observe a distance of 20 cm - 30 cm to the substrate. Spray evenly thin cross coats on the surface. Angled/tricky surfaces: First of all spray a fine mist coat, then allow to dry for approx. 5 minutes and complete the spraying operation.
Surface Coating System
|Surface Coating System (Coloured Enamels)|
|Substrate||Use||Substrate Preparation||Impregnation||Priming Coat||Intermediate Coat||Finishing Coat|
|Wood, derived materials||interior|
|–||Capalac White or Coloured Enamels|
BFS Data Sheet No. 18
|BFS Data Sheet No. 5||–||Capalac|
|BFS Data Sheet No. 6||–||Capalac|
|BFS Data Sheet No. 22||–||Capalac|
Mineral substrates, e.g. concrete, render, fibre-cement, etc.
|Sound existing coats of paint||interior/|
slightly sanding /leaching
|Prepare and prime defects |
according to the substrate
if necessary: CapalacDisbocolor 781
Note: Adhesion must be tested in advance for powder coatings, coil coatings and other critical/problematic substrates by coating test areas on site.
Always check substrates and coatings for compatibility.
Surface Coating System (Clear Coat):
Exterior: 2-3 coats of Capalac Disboklar 782 (no wood protection and protection against UV rays)
Interior: 1-2 coats of Capalac Disboklar 782
Sealing: On existing enamel coatings 1-2 coats of Capalac Disboklar 782 (for interior and exterior use). Always check existing coatings/substrates for compatibility.
ConsumptionGuide value: Approx. 1.2 m2 per spray/aerosol can.
Consumption may vary significantly, depending on substrate and component conditions.
Application ConditionsTemperature for Ambient Air and Substrate:
Min. +5 °C.
Material temperature: +18 °C to +22 °C.
Relative humidity must not exceed 80 %.
|At 20 °C and 65 % relative humidity.||dust dry||rainproof||recoatable|
|after time||20 minutes||40 minutes||6 hours|
Tool CleaningUpturn the can’s base vertically after use and press on the valve shortly until no material escapes.
Lift-off blocked sprayheads and clean with a needle. Attach the protective cap again.
Special Risks (Hazard Note) / Safety Advice (Status as at Date of Publication)Extremely flammable aerosol. Pressurised container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Do not breathe vapours/ spray. Use only outdoors or in a well-ventilated area. Store locked up. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/ 122 °F. Repeated exposure may cause skin dryness or cracking. Contains: acetone, n-butyl acetate, 2-methoxy-1-methylethyl acetate.
DisposalMaterials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities. Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.
Germany: Dispose spray/aerosol cans with residues of product via waste collection point accepting old paints and enamels.
EU limit value for the VOC contentAs spray enamels are not subject to the VOC guideline, no VOC indication required.
Further DetailsSee Material Safety Data Sheets (MSDS).
Customer Service CentreTel.: +49 6154 71-71710
Fax: +49 6154 71-71711
International Distribution: Please see www.caparol.com