caparol_pim_import/caparol_de/products/image/263551/070287_Indeko-plus.png

Indeko-plus

Preservative-free and resource-saving top-class interior paint.
    • LV Texte

    • Field of Application

    Indeko-plus is a resource-saving premium interior paint for high-quality, matt surfaces. In addition, Indeko-plus impresses with its pleasant and efficient application, has a particularly high hiding power and offers an optimal indoor climate thanks to the E.L.F. plus formula.

    Material Properties

    • Water-thinnable, ecologically compatible, low odour.
    • Free of fogging-active substances.
    • Easy to touch up.
    • Double covering power.
    • High degree of whiteness.
    • Slightly filling, non-yellowing.
    • Diffusion-capable, sd-value < 0.1 m

    Material Base / Vehicle

    Synthetic resin dispersion/emulsion according to German standard DIN 55945.

    Packaging/Package Size

    • Standard Product: 2.5 l, 5 l, 10 l and 12.5 litres

    • ColorExpress: 1.25 l, 2.5 l, 5 l, 7.5 l and 12.5 litres

    Colours

    White.

    Indeko-plus is tintable with CaparolColor or AVA colourants. If more than one bucket is manually tinted, all product must be thoroughly mixed before use in order to avoid colour differences.
    Quantities of 100 litres or more in individual colour shades may be ordered ready tinted ex factory.
    Indeko-plus (Base 1-3) can be tinted via the ColorExpress tinting machine system according to all current colour collections. Check tinted product prior to the application to avoid colour differences.
    Always use paint of same batch, when applying on seamless surfaces.
    Brilliant, intensive colour shades can have a lower opacity (hiding/covering power). It is therefore advisable to apply a first coat in a similar hiding pastel tint, based on white. Possibly a second finishing coat may be necessary.

    Gloss Level

    G4 - Dead-matt

    Storage

    Keep in a cool, but frost-free place.

    Technical Data

    Characteristics according to DIN EN 13 300: Tinting may cause variations.

    Wet abrasion

    R-Class 1

    Contrast ratio

    H10-Class: 1, bei 8 m2/l

    Maximum particle (grit) size

    S1 Fine (bis zu 100µm)

    Density

    Approx. 1.4 g/cm³

    Suitability according to Technical Information No. 606 Definition of Application Areas

    Interior 1Interior 2Interior 3Exterior 1Exterior 2
    ++–––
    (–) inapplicable / (○) of limited suitability / (+) suitable

    Suitable Substrates

    The substrate must be sound/stable, dry, clean, and free from all substances that may prevent good adhesion. In Germany: Follow VOB, part C, DIN 18 363, paragraph 3.

    Substrate Preparation

    Renders according to DIN EN 998-1 class CS II - CS IV / compressive strength min. 2 N/mm2: Solid, normally absorbent and even renders can be coated without primer coat. Prime slightly sanding, absorbent renders with OptiSilan TiefGrund, CapaSol RapidGrund or Sylitol RapidGrund 111. Prime more sanding renders with OptiSilan TiefGrund. 

    Gypsum plasters according to DIN EN 13279-1 / compressive strength min. 2 N/mm2: Sand and remove dust from gypsum plasters with sintered skin, prime with OptiSilan TiefGrund, CapaSol RapidGrund or Sylitol RapidGrund 111. 

    Gypsum boards/gypsum planks: Priming coat with OptiSilan TiefGrund. 

    Gypsum boards (plasterboard): Sand off filler burrs. Prime sanded gypsum filler areas and the gypsum boards with OptiSilan TiefGrund, CapaSol RapidGrund or Sylitol RapidGrund 111. In case of stronger absorption, prime with OptiSilan TiefGrund. For boards with water-soluble, discolouring ingredients, prime with Caparol AquaSperrgrund. Observe BFS Data Sheet No. 12, Part 2. 

    Concrete: Remove any release agent residues and chalking, sanding substances. Prime with OptiSilan TiefGrund, CapaSol RapidGrund or Sylitol RapidGrund 111. 

    Sand-lime masonry: Dry brush off existing salt efflorescence. Prime with CapaSol RapidGrund or Sylitol® Rapidgrund 111. In case of stronger absorption, prime with OptiSilan TiefGrund. 

    Load-bearing coatings: Recoat matt, slightly absorbent coatings directly. Roughen glossy surfaces and paint coatings. 

    Non-bearing coatings: Remove non-stable varnish and dispersion paints or synthetic resin plaster coatings. Prime coarsely porous, sanding or absorbent surfaces with OptiSilan TiefGrund. Remove non-bearing mineral paint coatings mechanically and remove dust from the surfaces. Apply one priming coat of OptiSilan TiefGrund. 

    Glue-Bound Distemper (Limewater Colour/Paint): Wash off the existing distemper very thoroughly, allow to dry and prime with Dupa-Putzfestiger. Alternatively, remove mechanically, rinse and prime with OptiSilan TiefGrund. 

    Woodchip, relief or embossed wallpapers made of paper and sample wallpapers: Coat without pre-treatment. For relief and embossed wallpapers made of paper as well as sample wallpapers, apply a trial coat. Foamed wallpapers may cause intermediate reactions (stickiness, odour) when coated. 

    Removed wallpaper: Wash off paste and waste paper residues. Apply one priming coat of OptiSilan TiefGrund. 

    Mould-infested surfaces: Remove mould by wet cleaning. Wash surfaces with Capatox and allow to dry thoroughly. Observe the legal and official regulations (e.g. the Biological Substances Ordinance and the Ordinance on Hazardous Substances). Increased protection against renewed infestation can be achieved with the products Malerit-W, Indeko-W and Fungitex-W. 

    Surfaces with nicotine, water, soot or grease stains: Wash off nicotine stains as well as soot or grease stains with water, adding a grease-dissolving cleaning agent, and allow to dry thoroughly. Clean dried water stains by brushing dry. Apply a barrier priming coat of Caparol AquaSperrgrund fein (see Technical Information No. 384) or Caparol-Filtergrund grob (see Technical Information No. 845). 

    Wood and wood-based materials: Apply one priming coat of Capacryl Holz-Isogrund. On boards factory-coated with melamine resin, apply one priming coat of Capacryl-Haftprimer. The joint areas/panel joints are not to be finished crack-free. Here, for higher visual requirements, a decoupling layer with thin gypsum boards with appropriate filling is recommended. 

    Old lime filler techniques: Remove sintered layer on the surface by sanding. In case of negative wetting test with water on sanded surface, the entire lime filler layer must be removed and the substrate must be rebuilt accordingly. In case of positive wetting test with water on sanded surface, prime with OptiSilan TiefGrund. 

    Chips, joints and defects: Fill the recess with Füllspachtel P. 


    Note Q2/Q3 Filling / thin gypsum layers < 0.5 mm:     When using gypsum-containing, hydraulically setting levelling compounds in quality level Q2/Q3, a transparent, water-based primer is recommended. For this, we refer to the Maler&Lackierer leaflet No. 2 -9/2020 "Adhesion problems of coatings on filled gypsum (cardboard) boards" of the Bundesverband Farbe, Gestaltung, Bautenschutz and the Bundesausschuss Farbe und Sachwertschutz. As an alternative to gypsum-based Q3 filling, filling with pasty filling compounds has proven successful. 

    Method of Application

    Applicable with paint brush, paint roller or airless spray equipment.

    Airless application:  

    Dilutionmax. 5% with Water
    Airless equipment
    Spray pressure150 - 180 bar
    Spray angle40° - 50°
    Nozzle size0,019" - 0,021"
    Pistol filter in MWca. 0,31mm
    Internally fed roller systems
    Spray pressure80 - 120 bar
    Pistol filter in MWca. 0,31mm















    Clean tools/equipment immediately after use with water.

    Surface Coating System

    White coat:
    A rich, even coat of Indeko-plus undiluted or diluted with a maximum of 5 % water. On high-contrast surfaces, apply one priming coat beforehand, diluted with max. 5 % water. Prime differently absorbent substrates with HaftGrund EG.

    Coloured coat:
    When using intensive colour shades, we recommend a priming coat of HaftGrund EG in the matching priming system colour shade.
    Stir material thoroughly immediately before application.To avoid rolling streaks, apply Indeko-plus generously and evenly and, after a short flash-off time, always re-roll in one direction. Always work on trimmed areas wet-on-wet. Particularly in the case of Intenive colour shades, rework should be carried out with great care.

    Consumption

    Approx. 125 ml/m2 per coat on an even substrate. On rough-textured surfaces correspondingly more.The exact consumption is best established by a trial coating on site.

    Application Conditions

    Lower Temperature Limit for Application and Drying: +5 °C for product, substrate and ambient air.

    Drying/Drying Time

    At +20 °C and 65 % relative humidity surface-dry and recoatable after 4 - 6 hours. Completely dry and ready for stress (loadable) after approx. 3 days. Lower temperatures and higher humidity extend the drying time.

    Note

    To avoid lapping, the product should be applied wet-on-wet and without interruption. 
    Due to the use of Caparol-Tiefgrund TB in the interiors, a typical solvent odour is released, hence proper ventilation must be provided during application and drying.
    Use non-aromatic, low-odour AmphiSilan-Putzfestiger in sensitive areas.
    Mechanical stress (scratching) on surfaces in dark shades may produce noticeable bright-toned stripes. For intensively coloured coatings on surfaces subjected to mechanical loads we recommend the application of an additional protective coat of PremiumColor, tinted to match the Indeko-plus coat in shade. Follow Technical Information PremiumColor.
    Touching up surfaces is depending on many parameters and noticeable marks of repared areas cannot be avoided. (In Germany: See BFS Data Sheet No. 25)

    German Certificates

    ■ Material testing for suitability for allergy sufferers TÜV Nord.
    ■ Blue Angel RAL DE-UZ 102
    ■ Testing of resistance to disinfectants by the Dr Robert Murjahn Institute.
    ■ REDcert 2- Fossil-free product thanks to the use of renewable raw materials in the value chain.
       saving product.

    Please Note (Status as at Date of Publication)

    Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Keep out of reach of children. Use combination filter A2/P2 and protective goggles when spraying. Ensure thorough ventilation during application and drying. Avoid eating, drinking and smoking while using the paint. In case of contact with eyes or skin, rinse immediately with plenty of water. Do not allow to enter drains, waterways or soil. Clean tools immediately after use with soap and water. If the base color or a wall color is tinted with a pigment paste or tinting paste that does not conform to the requirements of the Blue Angel, the tinted color no longer meets the criteria of the Blue Angel.

    Hotline for allergy enquiries: 0800/1895000 (free of charge from the German landline network).

    Disposal

    Only completely emptied containers should be given for recycling.

    EU limit value for the VOC content

    of this product (category A/a): max. 30 g/l (2010). This product contains < 1 g/l VOC.

    Giscode

    BSW10

    Substances of Content - Declaration

    polyacrylic resin, alkali water glass, silicates, titanium dioxide, mineral pigments / fillers, calcium carbonate, water, additives.

    Customer Service Centre

    Tel.: +49 6154 71-71710
    Fax: +49 6154 71-71711
    e-mail: kundenservicecenter@caparol.de

    International Distribution: Please see www.caparol.com

    Das gibt's nur bei Indeko-plus:

    • KonservierungsmittelfreiSchont Gesundheit & Umwelt
    • Doppelte Deckkraft
    • Optimale Verarbeitungseigenschaften

    Product recommendation:

    Details

    Akkordspachtel SXL

    Details

    CapaSol RapidGrund