Field of Application
High-grade intermediate and finishing coats on primed, dimensionally stable wood component parts, primed metals and unplastizised/rigid PVC, in the exteriors and interiors. Do not use white tints on heating systems to avoid yellowing (apply Capacryl Heizkörperlack).
Material Properties
- Low odour.
- Elegant and easy application.
- Non-blocking.
- High scratch resistance and shock strength.
- Diffusion-capable.
- Resistant to normal household cleaners.
- Wet scrub resistance class to DIN EN 13 300: Class 1
(corresponds to scrub-resistant according to DIN 53778). - Suitable for children toys according to DIN EN 71-3.
- Resistant to disinfectants.
Material Base / Vehicle
Polyurethane-acrylic dispersion/emulsion
Packaging/Package Size
Capacryl PU-Satin | Capacryl PU-Gloss | |
Standard Colours: | 375 ml, 750 ml, 2,5 Ltr.,10 Ltr. | 375 ml, 750 ml, 2,5 Ltr. |
ColorExpress: | 350 ml✱, 700 ml, 2,4 Ltr., 9,6 Ltr.✱ | 350 ml✱, 700 ml, 2,4 Ltr. |
✱not for Base Y and R |
Colours
WhiteCan be tinted via ColorExpress stations (Capamix) in many special tints of Caparol 3D-System plus collection and in many colours of other collections.
If necessary, apply a transparent sealing coat of Capadur Parkett- und SiegelLack on intensively or dark tinted Capacryl PU-Satin coatings in the interiors, to avoid a slight abrasion of pigments.
When applying colours with low opacity, like Red, Orange or Yellow, it is advisable to apply one priming coat using the matching colour shade of our Priming System.
Priming System colours are available via the ColorExpress tinting technique for the following products: Capacryl PU-Satin/PU-Gloss, Capacryl Haftprimer and Capacryl PU-Vorlack.
Colour Resistance according to BFS Data Sheet No. 26:
Binder: Class A
Pigmentation: Group 1 to 3 depending on the colour
Gloss Level
- Capacryl PU-Gloss:
Glossy. - Capacryl PU-Satin:
Silk-matt/semi-gloss (mid sheen)
Storage
Keep in a cool, but frost-free place.
Density
Approx. 1.3 g/cm³Suitability according to Technical Information No. 606 Definition of Application Areas
Interior 1 | Interior 2 | Interior 3 | Exterior 1 | Exterior 2 |
+ | + | + | + | + |
(–) inapplicable / (○) of limited suitability / (+) suitable |
Suitable Substrates
Primed, dimensionally stable wood component parts, primed metals and unplastizised/rigid PVC.
The substrate must be clean, sound/stable, dry and free from substances that may prevent good adhesion. Maximum permissible moisture/humidity content in dimensionally stable wood: 13%.
Method of Application
Capacryl PU-Gloss/PU-Satin can be applied by brush, roller or spraying equipment. Stir well before use and dilute, if necessary, with max. 5 - 15 % of tap (potable) water for intermediate coat.
For brush application use Orelmix brushes.
Manual application on large surfaces: Apply with a textured, short pile polyamide (nylon) roller and treat immediately with a fine-porous foam roller or Orelmix brush.
For a fast application and an even surface treatment the tool sizes should be adjusted to the surface area.
Guidelines for Spray Application:
Ø Nozzle | Spray Gun Pressure | Air Pressure | Dilution | |
Airless | 0.08 – 0.011 inch | 200 bar | – | max. 5 % |
Airmix/Aircoat | 0.011 – 0.013 inch | 120 bar | 2-3 bar | max. 5 % |
Low Pressure | 1.8 – 2.2 mm | – | approx. 0.5 bar | max. 15 % |
High Pressure | 2.0 – 2.5 mm | – | 2 – 3 bar | max. 15 % |
Surface Coating System
Substrate | Use | Substrate | Impregnation | Priming Coat | Intermediate | Finishing |
Wood, derived timber products | interior | sanding / cleaning | – | Capacryl Holz-IsoGrund 1) | Capacryl | Capacryl |
Wood, stable in dimensions | exterior | BFS Data | Capacryl Holz SchutzGrund | Capacryl Holz-IsoGrund 1) | ||
Iron, steel | interior | derusting / cleaning | – | Capalac AllGrund | ||
exterior | derusting / cleaning | – | 2 x Capalac AllGrund | |||
Zinc(galvanised substrates) | interior /exterior | BFS Data Sheet | – | Capacryl Haftprimer | ||
Aluminium / copper | interior /exterior | BFS Data Sheet | – | Capacryl Haftprimer | ||
Rigid PVC | interior /exterior | BFS Data Sheet | – | Capacryl Haftprimer | ||
Sound existing paint coatings | interior /exterior | sanding | Prepare and prime defects according to the substrate | Capacryl Haftprimer |
✱ Apply two intermediate coats on dimensionally stable wood component parts according to BFS Data Sheet No. 18.
|
Consumption
Approx. 100 – 120 ml/m2 per coat.
Consumption is a guide value and may vary, depending on substrate requirements. The exact consumption is best established by a trial coating (test area) on site.
Application Conditions
Lower Temperature Limit for Application and Drying:
Min. 8 °C for product, substrate and ambient air.
Relative humidity must not exceed 70 %.
Drying/Drying Time
At 20 °C and 65% relative humidity | dust dry | recoatable (by brush) | completely dry |
after hours | 1–2 | 10–12 | 48 |
Tool Cleaning
Immediately after use with water.
Special Risks (Hazard Note) / Safety Advice (Status as at Date of Publication)
If medical advice is needed, have product container or label at hand. Keep out of reach of children. Contains 1,2-benzisothiazol-3(2H)-one, reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Disposal: Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local, regional, national and international authorities.Disposal
Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities. Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.In Germany: Only completely emptied containers should be given for recycling. Dispose containers with residues of liquid product via waste collection point accepting old paints and enamels. Dispose dried/hardened product residues as construction site/demolition/municipal or domestic waste.
EU limit value for the VOC content
of this product (category A/d): max. 130 g/l (2010). This product contains max. 130 g/l VOC.
Product Code Paints and Enamels
BSW30
Substances of Content - Declaration
polyacrylic resin, polyurethane / polyacrylic resin, titanium dioxide, silicates, mineral pigments / fillers, water, glycols, glycol ethers, ester alcohol, additives, Preservative.Customer Service Centre
Tel.: +49 6154 71-71710Fax: +49 6154 71-71711
e-mail: kundenservicecenter@caparol.de
International Distribution: Please see www.caparol.com
Technical information
Material safety data sheet
- System instructions Capacryl PU-Gloss Basis Y
- System instructions Capacryl PU-Gloss Basis R
- System instructions Capacryl PU-Gloss Weiß
- System instructions Capacryl PU-Gloss Basis T
- System instructions Capacryl PU-Gloss Basis M
- System instructions Capacryl PU-Gloss Basis W
- System instructions Capacryl PU-Gloss Basis M
- System instructions Capacryl PU-Gloss Basis T
- System instructions Capacryl PU-Gloss Basis W
Technical information
Material safety data sheet
- System instructions Capacryl PU-Gloss Basis Y
- System instructions Capacryl PU-Gloss Basis R
- System instructions Capacryl PU-Gloss Weiß
- System instructions Capacryl PU-Gloss Basis T
- System instructions Capacryl PU-Gloss Basis M
- System instructions Capacryl PU-Gloss Basis W
- System instructions Capacryl PU-Gloss Basis M
- System instructions Capacryl PU-Gloss Basis T
- System instructions Capacryl PU-Gloss Basis W