Capadur LasurGel

Suitable Substrates

Dimensionally unstable, absorbent wooden parts. The substrate must be clean, stable/solid, and free from all substances that may prevent good adhesion. Permissible wood moisture content (WMC) exteriors: 12 % for hardwood and 15 % for softwood, on an average. Basic principles of wood preservation for constructions must be followed. They are a precondition for long-lasting wood preservation with coating materials.

Substrate Preparation

New Wood:
Sand/grind smooth surfaces in fibre direction, clean thoroughly and remove seeping wood contents,
e.g. wood resin/rosin and resin galls (pitch/resin pockets).

Existing Uncoated Wood:
Sand/grind off greyed, weathered surfaces to the stable, solid substrate and clean the surface very thoroughly.

Coated Wood:
Remove existing coatings such as enamels and thick-film wood stain to the stable, absorbent wood and clean thoroughly. Roughen/sand the surface of adherent thin-film wood stain (translucent coatings) and clean thoroughly. Check for compatibility with Capadur LasurGel.

Method of Application

Application:
Capadur LasurGel can be brush applied without stirring.

Surface Coating System

Substrate	Impregnation	Intermediate Coat	Finishing Coat
Dimensionally unstable wooden parts	Capalac Holz-Imprägniergrund	1 - 2 coats of Capadur LasurGel1)	Capadur LasurGel

1)	For light/bright colour shades two coats are necessary to obtain an optimal UV protection. One intermediate coat will normally be sufficient for dark shades (Nut Tree or darker). The transparent product has no UV protection and is preferably used as base material for tinting.

Consumption

Brush application on smooth wooden surfaces:
Approx. 80 - 100 ml/m² per coat, depending on substrate absorbency.
Brush application on semi-rough (sawn) wooden surfaces:
Approx. 200 - 250 ml/m² per coat, depending on substrate absorbency.

Application Conditions

Lower Temperature Limit for Application and Drying:
Min. +5° C for product, substrate and ambient air.
Relative humidity must not exceed 80 %.

Drying/Drying Time

At 20° C and 65 % relative humidity dry and recoatable after 12 hours. The absorbency of wooden substrates influences drying time and gloss level. On wood containing wood ingredients/contents
(e.g. oak wood) the drying time may be longer.

Special Risks (Hazard Note) / Safety Advice (Status as at Date of Publication)

Flammable liquid and vapour. Harmful to aquatic life with long lasting effects. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only outdoors or in a well-ventilated area. Avoid release to the environment. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. Repeated exposure may cause skin dryness or cracking. Use P2 dust filter for grinding. Do not breathe spray dust. Use A2/P2 combination filter for paint spraying.

Contains propiconazole, 3-iodo-2-propynyl butylcarbamate. May produce an allergic reaction. 

According to European Regulation 528/2012 this product is defined as a "treated article” (not a biocidal product) and contains the following biocidal substances: propiconazole (CAS-No. 60207-90-1), 3-iodo-2-propynyl butylcarbamate (CAS-No. 55406-53-6).

Disposal

Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities. Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.
In Germany: Only completely empty cans/containers should be handed in for recycling. Dispose containers with residues of liquid product via waste collection point accepting old paints and enamels. Dispose dried/hardened product residues as construction site/demolition/municipal or domestic waste.

EU limit value for the VOC content

of this product (category A/f): 700 g/l (2010). This product contains max. 700 g/l VOC.

Giscode

BSL40

Substances of Content - Declaration

Contains alkyd resin, coloured pigments, aliphates, silicates, butanonoxime, film preservative.

Further Details

See Material Safety Data Sheet (MSDS).

Customer Service Centre

Tel.: +49 6154 71-71710
Fax: +49 6154 71-71711
e-mail: kundenservicecenter@caparol.de

International Distribution: Please see www.caparol.com