Skip navigation

Capatect IDSystem Protect

System structure and performance features

True to our motto for Capatect interior insulation system - Simple. Effective. Smart as an elephant. we have extended the product range with the IDS Protect Sanierplatte CS, a calcium silicate hydrate for protection against fungus.

A sensible and moderate renovation of the building shell at the level of hygienic minimum heat protection with the renovation system IDS Protect provides a remedy by increasing the surface temperature. In connection with an alkaline coating build-up, via the pore structure of the boards, moisture is equalised via the cross section with a permanently even distribution and is successively emitted to the ambient air. What was once a moist surface now stays dry and provide a permanent support in suppressing the formation of fungus.

This effect is promoted and sustainably supported by the consequent mineral-based structure, up to the surface finish and the coating, because we want you to feel good in your house.

IDS Protect wall structure

System details

  • Vapour permeable
  • Capillary active
  • Non-flammable A1
  • Fungus-inhibiting
  • Dimensionally stable
  • Ecological

Innovation IDS Thermowinkel

The IDS Thermowinkel is the best proof there is that progress does not stop at moist corners! Our unique innovation for fungus protection convinces in terms of processing with all systems: Mineral, Protect.

Similar to the insulation wedge, the IDS Thermowinkel ensures a higher surface temperature – particularly in critical areas such as thermal bridges. The difference to an insulation wedge is that once the IDS Thermowinkel has been embedded in the old plaster layer, it is no longer visible. The invisible innovation against fungus!

The IDS Thermowinkel consists of a perforated aluminium elbow clad on an insulation strip with adhere reinforcement fabric. Its effectiveness can be attributed to the fact that with its aluminium sheet, it conducts the heat extremely well and, in this manner, transports higher surface temperatures in the corner. The coldest spot is therefore no longer in the corner, but on a connecting part where it is heated quicker by the faster speed of the air. The risk of fungal accumulation is therefore averted!

Example of the progression of the temperature without thermal insulation and with thermal insulation and Thermowinkel